TP-Link TL-WR940N manual 4.8.3 DMZ, Incoming Port Range cannot overlap each other

TL-WR940NWireless N Router

either TCP or UDP, or All.

5.Select Enable in Status field.

6.Click the Save button to save the new rule.

Figure 4-33 Add or Modify a Triggering Entry

To modify or delete an existing entry:

1.Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.

2.Modify the information.

3.Click the Save button.

Click the Enable All button to make all entries enabled

Click the Disabled All button to make all entries disabled.

Click the Delete All button to delete all entries

)Note:

1.When the trigger connection is released, the according opening ports will be closed.

2.Each rule allowed to be used only by one host on LAN synchronously. The trigger connection of other hosts on LAN will be refused.

3.Incoming Port Range cannot overlap each other.

4.8.3 DMZ

Choose menu “Forwarding→DMZ”, you can view and configure DMZ host in the screen (shown in Figure 4-34).The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose service such as Internet gaming or videoconferencing. DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP Address assigned to it because its IP Address may be changed when using the DHCP function.

-53-