TP-Link TL-WR1043ND manual Wireless MAC address Filtering

TL-WR1043NDWireless N Gigabit Router

Figure 4-20 Wireless MAC address Filtering

To filter wireless users by MAC Address, click Enable. The default setting is Disable.

To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or Modify Wireless MAC Address Filtering entry" page will appear as shown in Figure 4-21:

Figure 4-21 Add or Modify Wireless MAC Address Filtering entry

¾MAC Address - The wireless station's MAC address that you want to filter.

¾Status - The status of this entry either Enabled or Disabled.

¾Description - A simple description of the wireless station.

To add or modify a MAC Address Filtering entry, follow these instructions:

1.Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-00-07-8A.

2.Enter a simple description of the wireless station in the Description field. For example: Wireless station A.

3.Status - Select Enabled or Disabled for this entry on the Status drop-down list.

-42-