TL-WR1043NDWireless N Gigabit Router
private LAN can access FTP Server via Public Address while internet users can access
FTP Server via Internet Address.
To set up your FTP Server, please follow the instructions below:
1.Plug an external USB hard disk drive or USB flash drive into this Router, and then the screen will appear as shown in Figure 4-34.
Figure 4-34FTP Server Configuration
2.Click the Enable/Disable box to enable/disable internet access to FTP from WAN port.
3.Change the Service Port to specify a port for FTP Server to use. (The default is 21, do not change unless necessary.)
4.Click Add New Folder to add new folders for the FTP Server. The screen will show as Figure 4-35.
Figure 4-35Add or Modify Share Folder
