TP-Link TL-WR1043ND manual 15 IP & MAC Binding Setting, Binding Settings

TL-WR1043NDWireless N Gigabit Router

4.15 IP & MAC Binding Setting

Figure 4-83 the IP & MAC Binding menu

There are two submenus under the IP &MAC Binding menu (shown in Figure 4-83):Binding Settings and ARP List. Click any of them, and you will be able to scan or configure the corresponding function. The detailed explanations for each submenu are provided below.

4.15.1 Binding Settings

This page displays the IP & MAC Binding Setting table; you can operate it in accord with your desire (shown in Figure 4-84).

Figure 4-84 Binding Setting

¾MAC Address - The MAC address of the controlled computer in the LAN.

¾IP Address - The assigned IP address of the controlled computer in the LAN.

¾Bind - Check this option to enable ARP binding for a specific device.

¾Modify - To modify or delete an existing entry.

When you want to add or modify an IP & MAC Binding entry, you can click the Add New… button or Modify button, and then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding entry (shown in Figure 4-85).

-88-