TP-Link TL-WR1043ND manual Wireless MAC Filtering

TL-WR1043NDWireless N Gigabit Router

•Radius Server IP - Enter the IP address of the Radius Server.

•Radius Port - Enter the port that radius service used.

•Radius Password - Enter the password for the Radius Server.

•Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.

¾WPA-PSK/WPA2-PSK - It’s the WPA/WPA2 authentication type based on pre-shared passphrase.

•Version - you can choose the version of the WPA-PSK security on the drop-down list. The default setting is Automatic, which can select WPA-PSK(Pre-shared key of WPA) or WPA2-PSK(Pre-shared key of WPA) automatically based on the wireless station's capability and request.

•Encryption - When WPA-PSKor WPA is set as the Authentication Type, you can select either Automatic, or TKIP or AES as Encryption.

) Note:

If you check the WPA-PSK/WPA2-PSKradio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-19.

Figure 4-19

•PSK Passphrase - You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters.

•Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.

Be sure to click the Save button to save your settings on this page.

4.6.3Wireless MAC Filtering

Choose menu “Wireless→MAC Filtering”, and then you can control the wireless access by configuring the Wireless MAC Address Filtering function, shown in Figure 4-20.

-41-