24+2G Gigabit Managed Switch User's Guide |
Figure
5.2.2Connection
We propose the IP address of the Switch is 192.168.0.2, you can input http://192.168.0.2/ in the IE to connect the Switch. Then press Enter, the following screen will exist.
24+2G Gigabit Managed Switch User's Guide |
Input the user's name and password (the default user's name and password are supervisor. Furthermore, the default user has managing right.) Press OK to the page of WEB management.
Caution
The default user's name and password are set in factory. You can revise and add user's names and passwords in the Security Configuration. You must have management right when you revising such configuration. If you reset the Switch to factory configuration, all users' names and passwords set before will disappear. There is only default user's name and password.
Like TELNET, WEB has two managing rights, Manager's right and user's right.
Annex A RJ-45 Plug/Connector Pin Specification
When connecting the Switch to another switch, a bridge or a hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagram and table show the standard
1 2 3 4 5 | 6 7 8 |
|
87654321
Figure