Features and Specification | TP-Link TL-SL3226P manual

TL-SL3226P

24+2G Gigabit Managed Switch User's Guide

2.2Features and Specification

!Fully comply with IEEE802.3 standard

!Full and half-duplex for both 10Mbps and 100Mbps connections.

!Support IEEE802.3x flow control for full-duplex mode and collision- based backpressure for half-duplex mode

!Use non-blocking store-and-forward shared-memory architecture

!24 10/100BaseT/TX RJ-45 ports with auto-MDI/MDIX

!Provide 2 independent extension slots support 100/1000M module card and GBIC

!Support the port N-Way auto-negotiation function, automatically negotiate the speed and duplex mode between two devices

!Provide 6K MAC address space

!Support MAC address learning and aging with programmable age time

!Provide IGMP snooping function

!Provide maximum 26 port-based VLAN and 256 IEEE802.1Q VLAN

!Provide maximum 7 trunk groups of up to 4 member ports within 26 ports

!Provide SNMP, Web and Telnet/Console management

!Support SNMPv1, SNMPv2c

!Support SNMP MIB-II, Ethernet-like MIB, Bridge MIB, TP-LINK Enterprise MIB

!Support RMON Statistics, History, Alarm and Event group

!Support IEEE802.1D Spanning Tree protocol

!Support IEEE802.1X Port-Based Network Access Control protocol and connect to RADIUS

TL-SL3226P

24+2G Gigabit Managed Switch User's Guide

!Support static priority and IEEE802.1p class of service with 2-level priority mode

!Support Static MAC address management and MAC address Binding

!Provide the configuration function of port security, broadcast storm control and port sniffer

!Provide per port egress/ingress rate control function and the minimum granularity is 64kbps

!Provide static IP address configuration and dynamic IP parameters by

DHCP

!Support firmware upgrade, configuration backup and restore by TFTP

2.2.2		Specification

	Standard			Compliant with IEEE802.3, IEEE802.1D,
				IEEE802.1Q and IEEE802.1X
	Port			24 10/100M RJ-45 ports with auto-MDI/MDIX
				2 independent 100/1000M extension slots
				One console port (RS232)
	VLAN Mode			IEEE802.1Q VLAN mode
				Port-based VLAN mode
	Network Medium			10Base-T: CAT 3 or above CAT 3 UTP/STP
				100Base-TX: CAT 5 UTP/STP
				100Base-FX: MMF, SMF
				1000Base-T: CAT 5 UTP/STP
				1000Base-SX: MMF
				1000Base-LX: SMF or MMF
	LED		Power	Power on
	indicator		Each port	Two indicators: Link/Act and 10/100Mbps
	Dimension			440mm 260mm 44mm (W x H x L)
	Environment			Operating temperature: 0oC ~ 40oC
				Storage temperature: -20oC ~ 70oC
				Operating humidity: 10% ~ 90% RH
				Storage humidity: 5% ~ 90% RH
	Power			110-260V~ 50-60Hz