TP-Link TL-SL3226P manual Remarks, Optional Extension Modules, Port for connection to the ground

TL-SL3226P 24+2G Gigabit Managed Switch User's Guide

supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord into a power outlet. Supported input voltage range from 110 to 260VAC at 50-60Hz.

!The port for connection to the ground

There is a port on the left of the panel for the connection to the ground.

3.2.3 Optional Extension Modules

There are two module extension slots on the front panel of the TL-SL3226P as the following figure.

TX	RX	1000M100M	Actct
Link/Act		Link
		10/100M10M	FDX/ColDX/Col

Figure 3-5 Module of the TL-SL3226P

When you install any of the modules, you must turn off the power at first. After you take out the board on the slot, put the module into the extension slot. The TL-SL3226P can auto-identify the module and configure automatically.

The TL-SL3226P can use with TL-SM201 100M series modules, TL-SM301 Gigabit series modules and TL-SM301GB GBIC cards.

!TL-SM201 100M Series Module

TL-SL3226P		24+2G Gigabit Managed Switch User's Guide
Model No.	Standard	Interface	Network Media	Maximum Transfer
				Distance
TL-SM201U	100Base-TX	RJ-45	Cat 5 UTP/STP	100m
TL-SM201CM	100Base-FX	SC	50/125 um MMF
			62.5/125 um MMF	2000m
TL-SM201CS-20	100Base-FX	SC	9/125 um SMF	20000m
TL-SM201CS-40	100Base-FX	SC	9/125 um SMF	40000m
TL-SM201CS-60	100Base-FX	SC	9/125 um SMF	60000m

!TL-SM301 Gigabit series module

Model No.	Standard	Interface	Network Media	Maximum Transfer
				Distance
TL-SM301U	1000Base-T	RJ-45	Cat 5 UTP	100m
TL-SM301CM	1000Base-SX	SC	50/125 um MMF
			62.5/125 um MMF	550m
TL-SM301CS	1000Base-LX	SC	9/125 um SMF	10000m

Caution:

The extension slots with UTP module can support auto-negotiation and auto MDI/MDIX. These two slots are independent, never conflicting with other normal ports.

3.3Remarks

!Pay attention to the stability when you put the TL-SL3226P. It's serious if the TL-SL3226P drops.