TP-Link TL-SL3428 Configuring Lacp, LAG Membership Settings Page contains the following fields

Figure 68: LAG Membership Settings Page

The LAG Membership Settings Page contains the following fields:

LAG — Contains a user-defined drop-down LAG list.

Lag Name — Displays the user-defined LAG name.

LACP — Indicates if LACP is defined on the LAG. The possible field values are:

–Enable — Enables LACP on the LAG.

–Disable — Disables LACP on the LAG. This is the default value.

Port List — Displays a list of ports. Ports in the Port List can be added to the LAG.

LAG Members — Displays the list of the ports included in the LAG.

2.Define the LAG fields for the LAG port.

3.Click ports in the Port List and add the ports to the LAG Members list, using .

4.Click . The interface LAG membership properties are modified, and the device is updated.

7.2.2 Configuring LACP

LAG ports can contain different media types if the ports are operating at the same speed. Aggregated links can be set up manually or automatically established by enabling LACP on the relevant links. Aggregate ports can be linked into link- aggregation port-groups. Each group is comprised of ports with the same speed. The LACP Parameters Page contains fields for configuring LACP LAGs.

To view and configure LACP:

1.Click System > Bridging Config > Interface > LACP Parameters. The LACP Parameters Page opens:

Figure 69: LACP Parameters Page

The LACP Parameters Page contains the following fields:

LACP System Priority — Specifies system priority value. The field range is 1-65535. The field default is 1.

Port — Displays the port number to which timeout and priority values are assigned.

Port Priority — Displays the LACP priority value for the port. The field range is 1-65535.

LACP Timeout — Displays the administrative LACP timeout.

2. Define the LACP System Priority and click . The system priority for LACP is saved and the device is updated.

To modify LACP parameters:

1.Click System > Bridging Config > Interface > LACP Parameters. The LACP Parameters Page opens.

2.Click . The LACP Parameters Settings Page opens:

4 8