TP-Link TL-SL3428 Mapping Queues, Mapping CoS Values to Queues, Mapping QoS Values to Queues

Page 91

Figure 120: QoS Queue Settings Page

The QoS Queue Settings Page contains the following fields:

Queue — Indicates the queue number.

Scheduling

–Strict Priority — Indicates that traffic scheduling for the selected queue is based strictly on the queue priority.

–WRR — Indicates that traffic scheduling for the selected queue is based strictly on the WRR.

–WWR Weight — If WRR is selected, indicates the predetemined weights 8, 2, 4, and 1 for queues 4,3,2 and 1.

–% of WWR Bandwidth — If WWR weight is selected, indicates the percentage

2.Define the fields.

3.Click . The QoS queue settings are saved and the device is updated.

12.3 Mapping Queues

This section contains the following topics:

Mapping CoS Values to Queues

Mapping QoS Values to Queues

12.3.1 Mapping CoS Values to Queues

The CoS to Queue Page contains fields for classifying CoS settings to traffic queues.

To set CoS to Queue:

1.Click System > Quality of Service > Queue Mapping > CoS to Queue. The CoS to Queue Page opens:

Figure 121: CoS to Queue Page

Class of Service — Specifies the CoS priority tag values, where zero is the lowest and 8 is the highest.

Queue — Defines the traffic forwarding queue to which the CoS priority is mapped. Four traffic priority queues are supported, where zero is the lowest and 8 is the highest.

Restore Defaults — Allows you to restore default settings.

2.Modify the Queue values or select Restore Defaults.

3.Click . The CoS to Queue mapping settings are saved and the device is updated.

12.3.2 Mapping QoS Values to Queues

The DSCP to Queue Page contains fields for classifying DSCP settings to traffic queues. For example, a packet with a DSCP tag value of 3 can be assigned to queue 2.

To set DSCP to queues:

8 4

Page 90 Page 92
Image 91
Page 90 Page 92
Contents Embedded Web System User Guide Copyright & Trademarks FCC Statement Table of Contents Mapping Authentication Profiles Configuring Authentication MethodsDefining Access Profiles Defining Authentication ProfilesDefining Gvrp Configuring GarpConfiguring the Classic STP Defining STP Properties Configuring Multicast ForwardingConfiguration Upload Basic QoS ModeAdvanced QoS Mode Configuration DownloadGlossary Viewing StatisticsGuide Overview PrefaceIntended Audience Starting the TP-Link Embedded Web Interface Getting StartedClick . The TP-Link Embedded Web Interface Home Page opens Understanding the TP-Link Embedded Web InterfaceInterface Components TP-Link Web Interface Information Buttons Using the TP-Link Embedded Web Interface Management ButtonsTP-Link Web Interface Configuration Management Buttons Device RepresentationModifying Configuration Information Using Screen and Table OptionsDeleting Configuration Information Adding Configuration InformationClick . a confirmation message is displayed Resetting the DeviceClick System General Reset. The Reset Page opens Logging Off from the DeviceSystem Description Defining Device InformationConfiguring Daylight Savings Time Setting the System TimeSystem Information Time Recurring Daylight SavingsDefine the Date, Local Time and Time Zone Offset fields Polling for Anycast Time Information Configuring SntpSntp Overview Polling for Unicast Time InformationConfiguring Sntp Authentication Defining Sntp Global SettingsSntp Properties Page contains the following fields Click . The Add Sntp Authentication Page opens To configure Sntp authenticationSntp Authentication Page contains the following fields Check the Enable Sntp Authentication checkboxClick . The Add Sntp Server Page opens Defining Sntp Interface SettingsClick . The Sntp Server is added, and the device is updated Sntp Servers Page contains the following fieldsSelect the Interface Sntp Interface Settings Page contains the following fieldsCheck the Receive Server Updates option Click . The Add Sntp Interface Page opensSystem Log Severity Levels Configuring System LogsDefining General Log Properties Following table lists the log severity levelsViewing Flash Logs Viewing Memory Logs Severity To view Flash memory logs Defining System Log ServersClick . The Add Syslog Server Page opens Add Syslog Server Click . The Log server is defined and the device is updatedDefining Access Profiles Configuring Device SecurityConfiguring Management Security Configuring Authentication MethodsClick . The Add Access Profile Page opens Access ProfileProfile Rules Defining Profile RulesClick . The Profile Rule Settings Page opens Defining Authentication ProfilesAuthentication Profiles Page provides the following Define the Profile Method and enter the Profile Name fields Mapping Authentication ProfilesClick . The Add Authentication Profile Page opens Click . The Authentication Profile Settings Page opensAuthentication Mapping Page contains the following fields Authentication MappingDefine the Console, Telnet, and Secure Telnet SSH fields Defining TACACS+ Host SettingsTo define TACACS+ authentication settings Session is permittedSelect TACACS+ server entry Defining Radius Server SettingsClick . The TACACS+ Host Settings Page opens Click . The Add TACACS+ Host Page opensClick . The Add Radius Server Page opens RadiusClick . The Add Local User Page opens Configuring PasswordsClick . The Radius Server Settings Page opens Defining Local UsersLine Password Page contains the following fields Configuring Network SecurityDefining Line Passwords Defining Enable PasswordsNetwork Security Overview Defining Network Authentication PropertiesPort-Based Authentication Advanced Port-Based AuthenticationPort Authentication Page contains the following fields Defining Port Authentication PropertiesClick . The Port Authentication Settings Page opens Configuring Multiple HostsClick . The Multiple Host Settings Page opens Defining Authentication HostsTo define authenticated users Managing Port Security Configuring Traffic ControlEnabling Storm Control Click . The Port Security Settings Page opensCast B, cast M tbd Cast M, cast tbd Cast tbd Storm ControlClick . The Add IP Interface Page opens Defining IP AddressesDefining IP Addressing Defining IP AddressesDefining Dhcp Addresses Defining the Default GatewayClick . The IP Interface Settings Page opens Enter the name of the User Defined Default GatewayTo define ARP Defining ARPARP Page contains the following fields  Type Displays the IP address type. The possible Defining Domain Name SystemDefining DNS Servers DNS Server Page contains the following fieldsHost Mapping Page contains the following fields Configuring Host MappingEnter the Host Name and IP Address Add DNS HostConfiguring Ports Configuring InterfacesClick . The parameters are saved, and the device is updated Interface Configuration SettingsTo define LAG members Configuring LAGsClick . The LAG Membership Settings Page opens Defining LAG MembersLacp Parameters Page contains the following fields Configuring LacpLAG Membership Settings Page contains the following fields Click . The Lacp Parameters Settings Page opensDefine the Port Priority and Lacp Timeout settings Configuring VLANsDefining Vlan Properties Click . The Vlan properties are saved Modify the Vlan Name and Disable Authentication fieldsDefining Vlan Membership Vlan Member Properties Page contains the following fieldsVlan Member Membership Page contains the following fields Defining Vlan Interface SettingsVlan Interface Settings Page contains the following fields To define Vlan membershipClick . The Vlan / LAG Interface Settings Page opens Configuring GarpDefining Garp Garp Parameters Page contains the following fields Defining GvrpTo define Gvrp on the device Gvrp Parameters Forwarding Database Static Addresses Configuring Static Addresses Clear Table Clears the Current Address Table Configuring Dynamic Forwarding AddressesClick . The Add Forwarding Database Page opens To define the dynamic forwarding addressesSelect an Address Table Sort Key Select the Interface, the MAC Address, and the Vlan IDProperties. The STP Properties Page opens Configuring the Classic STPDefining STP Properties Click System Bridging Info Spanning Tree STPComplete the Spanning Tree State and Bridge Settings fields Defining STP Interface SettingsClick . The STP Interface Settings Page opens STP Interface Settings Page contains the following fieldsClick the STP enable checkbox Define the fields Rstp Configuring the Rapid STPClick . The Rstp Settings Page opens Configuring the Multiple STPDefining Mstp Properties Click . The device information is updated Configuring Mstp InstancesDefine the Region Name, Revision and Max Hops fields Mstp Interface Settings Page contains the following fields Configuring Mstp Vlan InstancesConfiguring Mstp Interface Settings Mstp Vlan Instance Configuration Page opensModify the Port Priority and Path Cost Mstp Interface SettingsIgmp Snooping Page contains the following fields Configuring Multicast ForwardingTo define multicast groups Click the Enable Igmp Snooping Status checkboxClick . The Multicast Global Parameters Settings Page opens Defining Multicast Bridging GroupsJoin a Multicast group Igmp Port/LAG Members Table Control SettingsClick . The Multicast Group Settings Page opens Multicast group statically in the Current RowForbidden Port is not attached to a Multicast router or switchDefining Multicast Forward All Parameters Multicast Forward All Page contains the following fieldsSnmp Snmp v1 and v2cDefining Snmp Security Snmp Security Views Page contains the following fields Define the Local Engine ID and Use Default fieldsDefining Snmp Global Parameters Defining Snmp ViewsClick . The Add Snmp View Page opens Defining Snmp Group ProfilesDefining Snmp Group Members Click . The Snmp Group Profile Settings Page opensClick . The Add Snmp Group Profile Page opens Contains the following fields Click . The Snmp Group Membership Settings Page opensAddition to the fields in the Snmp Security Group Membership Page, The Add Snmp Group MembershipSnmp Security Communities Page is divided into Defining Snmp CommunitiesSnmp Communities Basic Table Snmp Communities Advanced TableDefining Notification Filters Configuring Snmp Notification SettingsDevice is updated To modify Snmp Group Membership settings Defining Snmp Notification PropertiesSnmp Notification FiIter Page contains the following fields Defining Notification ReceiversClick . The Add Snmp Notification Filter Page opens SNMPv3 Notification Recipient SNMPv1,2c Notification RecipientSnmp Notification Receiver Page c is divided into Click . The Add Snmp Notification Receiver Page opens Click . The Snmp Notification Receiver Settings Page opensQuality of Service Overview Configuring Quality of ServiceMapping to Queues QoS Modes Following table contains the VPT to Queue default settingsVPT Default Mapping Table Dscp Default Mapping TableAdvanced QoS Mode Enabling Quality of ServiceEnabling Quality of Service Basic QoS ModeDefining Queues CoS Settings Scheduling Mapping QueuesMapping CoS Values to Queues Mapping QoS Values to QueuesDscp to Queue To download system files Managing System FilesDownloading System Files Download TypeUpload Type Configuration DownloadUploading System Files Firmware DownloadSoftware Image Upload Configuration UploadActivating Image Files Copying System FilesSelect Restore Configuration Factory Defaults Select Copy ConfigurationConfiguring Port Mirroring Performing Device DiagnosticsClick the Remove checkbox for selected item, and click To modify port mirroring settingsClick . The Port Mirroring Settings Page opens Viewing Integrated Cable TestsOptical Transceivers Page contains the following fields Viewing Optical TransceiversInterface Statistics Page contains the following fields Viewing StatisticsViewing Interface Statistics Viewing Device Interface StatisticsEtherlike Statistics Page contains the following fields Viewing Etherlike StatisticsOpen the Interface Statistics Click . The interface statistics counters are clearedOpen the Etherlike Statistics Viewing Gvrp StatisticsClick . The Gvrp interface statistics counters are cleared Managing Rmon StatisticsViewing EAP Statistics Open the Gvrp StatisticsViewing Rmon Statistics  Configuring Rmon History  Defining Rmon AlarmsRmon Statistics Page contains the following fields Rmon History Control Page contains the following fields Configuring Rmon HistoryDefining Rmon History Control Open the Rmon StatisticsRmon History Table Page contains the following fields Viewing the Rmon History TableClick . The Add Rmon Event User Page opens Configuring Rmon EventsDefining Rmon Events Control Rmon Events Control Page contains the following fieldsViewing the Rmon Events Logs Defining Rmon AlarmsClick System Statistics Rmon Events. To modify an Rmon alarm user Click . The Add Rmon Alarm User Page opensClick . The Edit Rmon Alarm User Page opens 103 Glossary Backplane Boot VersionBootP Class of ServiceCombo Port Duplex ModeClient CollisionFragment EthernetFlapping Flow ControlImage File Ieee 802.1dIeee 802.1p EEE 802.1qProcessing, as there is more information to process Authenticates the origin of the communicationLimited geographical area ProcessPort NodePacket PolicingStand-alone Mode RJ-11 ConnectorRJ-45 Connector Running ConfigurationTrunking Subnet MaskTelnet Trap71035590
Related manuals
Manual 32 pages 61.46 Kb Manual 32 pages 10.85 Kb

TL-SG3109, TL-SL3428, TL-SL3452 specifications

The TP-Link TL-SL3428 is a feature-rich Ethernet switch designed for small to medium-sized business environments. It is part of TP-Link’s JetStream series, which emphasizes reliability, performance, and robust management capabilities. Built with 28 10/100/1000 Mbps ports, the TL-SL3428 provides sufficient bandwidth to support a wide range of network applications.

One of the standout features of the TL-SL3428 is its support for Layer 2 management protocols. This allows for more granular control and optimized performance across network segments. The switch supports VLAN (Virtual Local Area Network) segmentation, which enhances network security and efficiency by isolating various types of traffic. This feature is particularly useful in larger organizations where different departments or teams may require separate network environments.

The TL-SL3428 also includes advanced QoS (Quality of Service) capabilities. This functionality prioritizes traffic based on predefined rules, which ensures that critical applications receive the necessary bandwidth to function optimally. With QoS implementation, users can experience minimized latency, leading to better performance in VoIP and video conferencing applications.

In terms of redundancy and reliability, the switch also supports Link Aggregation Control Protocol (LACP), enabling multiple connections to be combined for increased bandwidth and failover support. This feature significantly enhances network resilience, ensuring minimal downtime during failures.

Power over Ethernet (PoE) support is another important characteristic of the TL-SL3428. With PoE capabilities, this switch can deliver electrical power along with data over the same Ethernet cable, simplifying installation and reducing the need for additional wiring. This is especially advantageous for IP devices like cameras, access points, and VoIP phones.

Security features are abundant in the TL-SL3428 as well. It implements port security, storm control, and DHCP snooping, all of which contribute to a secure network infrastructure. The switch’s management capabilities can be accessed through a user-friendly web interface, making it easier for IT administrators to configure and monitor network activities.

Overall, the TP-Link TL-SL3428 is an exemplary choice for businesses looking to enhance their network performance with advanced management features, security protocols, and reliability. Its combination of speed, flexibility, and manageability make it a valuable tool for any growing organization.
Top Page Image Contents