Configuring the Rapid STP, Rstp | TP-Link TL-SG3109, TL-SL3452

9.2 Configuring the Rapid STP

While Classic STP prevents Layer 2 forwarding loops in a general network topology, convergence can take between 30-60 seconds. This time may delay detecting possible loops and propagating status topology changes. Rapid Spanning Tree Protocol (RSTP) detects and uses network topologies that allow a faster STP convergence without creating forwarding loops. The Global System LAG information displays the same field information as the ports, but represent the LAG RSTP information.

To view and define RSTP:

1.Click System > Bridging Info > Spanning Tree > RSTP. The RSTP Page opens:

Figure 87: RSTP Page

The RSTP Page contains the following fields:

Interface — Displays the port or LAG on which Rapid STP is enabled.

Role — Displays the port role assigned by the STP algorithm to provide to STP paths.

The possible field values are:

–Root — Provides the lowest cost path to forward packets to the root switch.

–Designated — Indicates the port or LAG through which the designated switch is attached to the LAN.

–Alternate — Provides an alternate path to the root switch from the root interface.

–Backup — Provides a backup path to the designated port path toward the Spanning Tree leaves. Backup ports occur only when two ports are connected in a loop by a point-to-point link, or when a LAN has two or more connections connected to a shared segment.

–Disabled — Indicates that the port is not participating in the Spanning Tree.

Mode — Displays the current STP mode. The STP mode is selected in the STP Properties Page.

The possible field values are:

–STP — Indicates that Classic STP is enabled on the device.

–Rapid STP — Indicates that Rapid STP is enabled on the device.

–Multiple STP — Indicates that Multiple STP is enabled on the device.

Fast Link Operational Status — Indicates whether Fast Link is enabled or disabled for the port or LAG. If Fast Link is enabled for a port, the port is automatically placed in the forwarding state.

Point-to-Point Admin Status — Indicates whether a point-to-point link is established, or if the device is permitted to establish a point-to-point link. The possible field values are:

–Enable — The device is permitted to establish a point-to-point link, or is configured to automatically establish a point-to- point link. To establish communications over a point-to-point link, the originating PPP first sends Link Control Protocol (LCP) packets to configure and test the data link. After a link is established and optional facilities are negotiated as needed by the LCP, the originating PPP sends Network Control Protocol (NCP) packets to select and configure one or more network layer protocols. When each of the chosen network layer protocols has been configured, packets from each network layer protocol can be sent over the link. The link remains configured for communications until explicit LCP or NCP packets close the link, or until some external event occurs. This is the actual switch port link type. It may differ from the administrative state.

–Disable — Disables point-to-point link.

–Auto — Enables a point-to-point link automatically.

6 1

TL-SG3109, TL-SL3428, TL-SL3452 specifications

The TP-Link TL-SL3428 is a feature-rich Ethernet switch designed for small to medium-sized business environments. It is part of TP-Link’s JetStream series, which emphasizes reliability, performance, and robust management capabilities. Built with 28 10/100/1000 Mbps ports, the TL-SL3428 provides sufficient bandwidth to support a wide range of network applications.

One of the standout features of the TL-SL3428 is its support for Layer 2 management protocols. This allows for more granular control and optimized performance across network segments. The switch supports VLAN (Virtual Local Area Network) segmentation, which enhances network security and efficiency by isolating various types of traffic. This feature is particularly useful in larger organizations where different departments or teams may require separate network environments.

The TL-SL3428 also includes advanced QoS (Quality of Service) capabilities. This functionality prioritizes traffic based on predefined rules, which ensures that critical applications receive the necessary bandwidth to function optimally. With QoS implementation, users can experience minimized latency, leading to better performance in VoIP and video conferencing applications.

In terms of redundancy and reliability, the switch also supports Link Aggregation Control Protocol (LACP), enabling multiple connections to be combined for increased bandwidth and failover support. This feature significantly enhances network resilience, ensuring minimal downtime during failures.

Power over Ethernet (PoE) support is another important characteristic of the TL-SL3428. With PoE capabilities, this switch can deliver electrical power along with data over the same Ethernet cable, simplifying installation and reducing the need for additional wiring. This is especially advantageous for IP devices like cameras, access points, and VoIP phones.

Security features are abundant in the TL-SL3428 as well. It implements port security, storm control, and DHCP snooping, all of which contribute to a secure network infrastructure. The switch’s management capabilities can be accessed through a user-friendly web interface, making it easier for IT administrators to configure and monitor network activities.

Overall, the TP-Link TL-SL3428 is an exemplary choice for businesses looking to enhance their network performance with advanced management features, security protocols, and reliability. Its combination of speed, flexibility, and manageability make it a valuable tool for any growing organization.