TP-Link TL-SL3452, TL-SL3428 Igmp Port/LAG Members Table Control Settings, Join a Multicast group

Bridge Multicast Address — Identifies the Multicast group MAC address/IP address.

Port — Displays the port that can be added to a Multicast service.

LAG — Displays the LAG that can be added to a Multicast service.

The following table contains the IGMP port and LAG members management settings:

Table 5: IGMP Port/LAG Members Table Control Settings

Port Control	Definition
D	Dynamically joins ports/LAG to the Multicast group in the Current Row.
S	Attaches the port to the Multicast group as static member in the Static Row.The port/LAG has joined
	the Multicast group statically in the Current Row.
F	Forbidden ports are not included the Multicast group, even if IGMP snooping designated the port to
	join a Multicast group.
Blank	The port is not attached to a Multicast group.

2. Click . The Add Multicast Group Page opens:

Figure 97: Add Multicast Group Page

3.Define the VLAN ID, Bridge Multicast IP Address, and Bridge Multicast MAC Address fields.

4.Click .

5.In the Multicast Group Page, select ports to join the Multicast group.

6.Define the Multicast port settings.

7.Click . The Multicast group is defined, and the device is updated.

To modify the Multicast group settings:

1.Click System > Bridging Config > Multicast Support > Bridge Multicast > Multicast Group. The Multicast Group Page opens.

2.Click . The Multicast Group Settings Page opens:

Figure 98: Multicast Group Settings Page

3.Select Ports/LAGs for the selected VLAN and define the port settings.

4.Click . The Multicast group settings are modified and device information is updated.

6 8