TP-Link TL-SL3428, TL-SL3452 manual SNMPv1,2c Notification Recipient, SNMPv3 Notification Recipient

Figure 115: SNMP Notification Receiver Page

The SNMP Notification Receiver Page c is divided into the

following tables:

SNMPv1,2c Notification Recipient

SNMPv3 Notification Recipient

11.4.3.1 SNMPv1,2c Notification Recipient

The SNMP v1, v2c Recipient table contains the following fields:

Recipients IP — Displays the IP address to which the traps are sent.

Notification Type — Displays the type of notification sent. The possible field values are:

–Trap — Indicates traps are sent.

–Inform — Indicates informs are sent.

Community String — Displays the community string of the trap manager.

Notification Version — Displays the trap type. The possible field values are:

–SNMP V1 — Indicates that SNMP Version 1 traps are sent.

–SNMP V2c — Indicates that SNMP Version 2 traps are sent.

UDP Port — Displays the UDP port used to send notifications. The field range is 1-65535. The default is 162.

Filter Name — Indicates if the SNMP filter for which the SNMP Notification filter is defined.

Timeout — Indicates the amount of time (in seconds) the device waits before resending informs. The field range is 1-300. The default is 15 seconds.

Retries — Indicates the number of times the device resends an inform request. The field range is 1-255. The default is 3.

Remove — Deletes the currently selected recipient. The possible field values are:

–Checked — Removes the selected recipient from the list of recipients.

–Unchecked — Maintains the list of recipients.

11.4.3.2 SNMPv3 Notification Recipient

The SNMPv3 Notification Recipient table contains the following fields:

Recipient IP — Displays the IP address to which the traps are sent.

Notification Type — Displays the type of notification sent. The possible field values are:

–Trap — Indicates that traps are sent.

–Inform — Indicates that informs are sent.

User Name — Displays the user to which SNMP notifications are sent.

Security Level — Displays the means by which the packet is authenticated. The possible field values are:

–No Authentication — Indicates that the packet is neither authenticated nor encrypted.

–Authentication — Indicates that the packet is authenticated.

UDP Port — Displays the UDP port used to send notifications. The field range is 1-65535. The default is 162.

Filter Name — Includes or excludes SNMP filters.

Timeout — Indicates the amount of time (in seconds) the device waits before resending informs. The field range is 1-300. The default is 15 seconds.

Retries — Indicates the number of times the device resends an inform request. The field range is 1-255. The default is 3.

Remove — Deletes the currently selected recipient. The possible field values are:

–Checked — Removes the selected recipient from the list of recipients.

7 8