| Web Smart Gigabit Switch Family User's Guide |
|
|
Further Explanation
1)If the port is set to secure port manually in "Port Parameter " page, the dynamic binding cannot be configured here. If the port with dynamic binding enabled transfers into secure state automatically because the port has bound the specified number MAC address, the dynamic binding function of the port can be enabled or disabled again.
2)The combo box in "All Ports " entry is used to change the selections of corresponding combo boxes of all ports simultaneously.
3)A "Refresh" button is provided to look up the latest number of bound MAC address.
Notice:
If the switch port is a trunk member or an unplugged SFP port, the binding function of the port cannot be configured here.
5.3.3.5 Bound MAC Address
This page is showed as below:
Figure 5-29 Bound MAC Address
Index: Indicates the entry index in dynamic binding MAC address table.
MAC Address: Indicates MAC address already bound to the switch ports.
Port: Indicates the switch port number corresponding to the bound MAC address.
48