TP-Link TL-SG2224WEB manual User, Port Setting 4.2.1 Port Parameter, Duplex Mode, Flow Control

Page 19

TL-SG2216WEB/TL-SG2224WEB

Web Smart Gigabit Switch Family User's Guide

 

 

4.1.4 User

The username and password can be modified in order to exclude illegal users.

4.2Port Setting 4.2.1 Port Parameter

4.2.1.1 Duplex Mode

Ports have duplex modes, 10M HD, 10M FD, 100M HD, 100M FD and 1000M FD.

The First part indicates the transmission rate and the second part indicates the duplex mode.

HD: half-duplex, the port supports transmission between the device and the client in only one direction at a time.

FD: full-duplex, the port supports transmission between the device and its link partner in both directions simultaneously.

Switch support auto negotiation, it’s a protocol between two link partners that enables a port to advertise its transmission rate and duplex mode to its partner.

4.2.1.2 Flow Control

Flow control enables lower speed devices to communicate with higher speed devices. This is implemented by the higher speed device refraining from sending packets.

4.2.1.3 Port Security

If the port security is enabled, it will not learn new MAC address and only

12

Image 19
Contents Users Guide Copyright & Trademarks FCC Statement EC Declaration of Conformity Europe Table of Contents Aging Time and Dynamic Address Table WEB Management Page Package contents Guide Overview IntroductionIntended Audience AgreementTL-SG2216WEB/TL-SG2224WEB Introduction to the Device Features and Technical SpecificationsFeatures Device DescriptionTechnical Specifications LED Mounting Device Install the DeviceDesktop or Shelf Installation Rack InstallationAC Power Switch Aspect DescriptionFront Panel Back Panel Back panel of the switch is configured as followsSFP Module System Information System SettingReboot & Reset Function DescriptionFlow Control Port Setting 4.2.1 Port ParameterDuplex Mode UserStorm Control Port Statistic and Port StatusPort Description Switch IP Address Network SettingStatic MAC Address Table Aging Time and Dynamic Address TableDynamic Binding Filtering MAC Address TableVlan Mode Vlan SettingPing MTU Vlan Priority Mode Priority SettingPort Trunking Port-Based Priority Port Default PriorityPort Mirroring Virtual Cable TestTL-SG2216WEB/TL-SG2224WEB Getting Started Connecting to the DeviceWEB Management OverviewSettings Dialog Internet Options Dialog Dialog will display as below Resolution Settings Login the Switch Setting the DevicePort Led Indicator Table SFP uninstalled 10a Port Status Table TL-SG2216WEB/TL-SG2224WEB System Information System SettingFurther explanation File TransferThis page is shown below Reboot & ResetUser Port SettingPort Parameter TL-SG2216WEB/TL-SG2224WEB Disable Indicates it will learn new MAC address 19 Port Statistic Port StatisticTL-SG2216WEB/TL-SG2224WEB Port Status Storm Control Port Description Switch IP Address Network Setting24 Static MAC address Static MAC Address26 a Failed Search Filtering MAC Address Dynamic Binding 28 Dynamic Binding  Port Indicates switch port number Further explanation Bound MAC Address Aging Time Vlan Mode Vlan SettingPing 33 Port Vlan Setting Port Vlan SettingTL-SG2216WEB/TL-SG2224WEB Tag Vlan Global Setting Tag Vlan Setting TL-SG2216WEB/TL-SG2224WEB MTU Vlan Setting Port Trunking Priority SettingPort-Based Priority Priority Mode6.4 802.1p Priority Class Port Default Priority44 Port Mirroring Port MirroringVirtual Cable Test TL-SG2216WEB/TL-SG2224WEB Appendix a Pin Explain For RJ-45 Connector MDI-II MDI-X Table of Factory Defaults Appendix B Table of Factory DefaultsPvid Table of Function Differences of Switch Family Appendix C Table of Function Differences of Switch Family71035568