TP-Link manual TL-SG2216WEB/TL-SG2224WEB

Page 62

TL-SG2216WEB/TL-SG2224WEB

Web Smart Gigabit Switch Family User's Guide

 

 

VLAN ID: configure the VLAN ID.

Port: The switch port number.

Member: Select the member of the VLAN here. If this field is checked, it indicates that the port belongs to the current VLAN.

Egress Frame: The solution to the egress frame. "Drop Tag" indicates drop the tag header before sending the frame. "Add Tag" indicates add the tag header before sending the frame.

Description: Display the user-defined port description.

All Ports: By operating on this field expediently, you can set the values of all ports in the corresponding field.

All VLAN: Display all defined Tag VLANs.

Figure 5-37 All Tag VLAN

Select All: Select all ports to be VLAN members.

Clean Up: Clean up all members of the VLAN.

Submit: Submit to buildup a VLAN with the selected members.

Notice:

1)VID of the VLAN must be unique and within the range of 1 to 4094.

2)At least two port members should be included to add a VLAN group. (If the page is submitted with 0 VLAN member, it indicates to delete the VLAN.)

3)If any Trunk has been set, the Trunk can be configured as a VLAN member and member ports of the Trunk cannot be configured (see Port 1 and 2 in the figure for example).

55

Image 62
Contents Users Guide Copyright & Trademarks FCC Statement EC Declaration of Conformity Europe Table of Contents Aging Time and Dynamic Address Table WEB Management Page Package contents Agreement IntroductionIntended Audience Guide OverviewTL-SG2216WEB/TL-SG2224WEB Device Description Features and Technical SpecificationsFeatures Introduction to the DeviceTechnical Specifications LED Rack Installation Install the DeviceDesktop or Shelf Installation Mounting DeviceFront Panel Switch Aspect DescriptionAC Power Back panel of the switch is configured as follows Back PanelSFP Module Function Description System SettingReboot & Reset System InformationUser Port Setting 4.2.1 Port ParameterDuplex Mode Flow ControlPort Description Port Statistic and Port StatusStorm Control Network Setting Switch IP AddressAging Time and Dynamic Address Table Static MAC Address TableFiltering MAC Address Table Dynamic BindingPing Vlan SettingVlan Mode MTU Vlan Port Trunking Priority SettingPriority Mode Virtual Cable Test Port Default PriorityPort Mirroring Port-Based PriorityTL-SG2216WEB/TL-SG2224WEB Overview Connecting to the DeviceWEB Management Getting StartedSettings Dialog Internet Options Dialog Dialog will display as below Resolution Settings Setting the Device Login the SwitchPort Led Indicator Table SFP uninstalled 10a Port Status Table TL-SG2216WEB/TL-SG2224WEB System Setting System InformationFile Transfer Further explanationReboot & Reset This page is shown belowPort Parameter Port SettingUser TL-SG2216WEB/TL-SG2224WEB Disable Indicates it will learn new MAC address Port Statistic 19 Port StatisticTL-SG2216WEB/TL-SG2224WEB Port Status Storm Control Port Description Network Setting Switch IP AddressStatic MAC Address 24 Static MAC address26 a Failed Search Filtering MAC Address Dynamic Binding 28 Dynamic Binding  Port Indicates switch port number Further explanation Bound MAC Address Aging Time Ping Vlan SettingVlan Mode Port Vlan Setting 33 Port Vlan SettingTL-SG2216WEB/TL-SG2224WEB Tag Vlan Global Setting Tag Vlan Setting TL-SG2216WEB/TL-SG2224WEB MTU Vlan Setting Priority Setting Port TrunkingPriority Mode Port-Based PriorityPort Default Priority 6.4 802.1p Priority ClassPort Mirroring 44 Port MirroringVirtual Cable Test TL-SG2216WEB/TL-SG2224WEB Appendix a Pin Explain For RJ-45 Connector MDI-II MDI-X Appendix B Table of Factory Defaults Table of Factory DefaultsPvid Appendix C Table of Function Differences of Switch Family Table of Function Differences of Switch Family71035568