Polycom DOC2559C Placing the RMX 4000 in a 23 Rack, 4Removing and attaching 19 and 23 brackets

Chapter 1- Hardware Description

Placing the RMX 4000 in a 23” Rack

1Mounting the RMX 4000 on a 23” rack requires that first the handles and then the 19” brackets be removed from the MCU. This is shown in Figure 1-4.

Figure 1-4Removing and attaching 19” and 23” brackets

2After removal, attach the 23” brackets as provided in the Rack Installation Accessories kit, and re-install the handles to the 23” brackets. This is shown in Figure 1-5.

Figure 1-5Installing the handles and brackets & detailed rear view of 23” bracket attachment

3Mount the RMX on top of the rack brackets using the blades or place it on a rack mount shelf with chassis runners.

4Fasten the RMX to the rack with 8 screws into the holes provided on the RMX’s front as shown in Figure 1-3.

1-14