Polycom DOC2559C manual Replacing the RTM LAN

Page 61

Polycom RMX 4000 Hardware Guide

10Tighten the captive screws on the rear panel of the RMX 4000 that secure the RTM-IP 4000 card.

11Reconnect the cables.

12Turn ON the RMX 4000.

Replacing the RTM LAN

The RTM LAN card on the rear of the RMX 4000 provides connectivity to all the MCU modules. Use the following procedure to replace the RTM LAN card:

1Ensure that the power switch/circuit switch on the RMX 4000 is turned OFF (O).

2Remove the cables connected to the card.

3Unscrew the captive screws on the rear panel of the RMX 4000 that secure the RTM LAN card.

4Use the metal ejector levers to pull the RTM LAN card out of its slot in the backplane.

5Carefully slide the RTM LAN card out through the rear panel.

6On the card to be installed, move the ejector levers to their fully open position.

7Slide in the replacement RTM LAN card.

8Push the RTM LAN card firmly into the backplane, making sure it is properly seated in its slots.

2-17

Image 61

Contents Polycom RMX 4000 Hardware Guide USA Συμμορφωνεται Προσ ΤΙΣ Ουσιωδεισ Απαιτησεισ ΚΑΙ ΤΙΣ Russian Communication Certificate Regulatory NoticesTable of Contents ISDN/PSTN Clock Source MPM+ and MPMx Media Cards RMX 4000 Rear Panel RTM-IPHardware Description Power Consumption Power SupplyPhysical Media ProtocolsConferencing Capacities RMX 4000 System CapacitiesFollowing table summarizes the different system capacities EnvironmentSystem Functions MPM+ Mode MPMx Mode MPMx Card Resource Capacities per Card AssemblyMPM+ Card Maximum Possible Resources Per Card Resource Capacities per Card Type MPM+ and MPMxResource Type MPMxSite Safety Requirements Safety RequirementsRack Mount Safety Precautions General Installation PrecautionsUnpacking the RMX Installing the RMXHardware Description Standalone RMX 4000 Installation Installing the RMX in a Rack or as a StandaloneRack Mount Preparations Placing the RMX 4000 in a 19 Rack 2Installing chassis runners and RMX in a rack3RMX 4000 Rack Mount 4Removing and attaching 19 and 23 brackets Placing the RMX 4000 in a 23 RackTo reverse mount the RMX 4000 on a 19 rack Reverse Mounting the RMX 4000 in a RackConnecting the RMX 4000 to Power Sources Make sure that the power button is switched OFF on the RMX Connecting the RMX 4000 to AC PowerConnecting the RMX 4000 to -48DC Selv Power Type a Type B Types of DC Circuit Breakers installed on RMXTo connect the cables AC and DC systems RTM-IP Connecting Cables to the RMXFor more information about specific card connections, see First-time Power-upRTM LAN on RMX 4000 Front Panel RMX 4000 Components8shows the front panel of an RMX 4000 DC system Component Description MPM+ and MPMx Media Cards Card Configuration Mode Selection During Startup / Restart9RMX 4000 AC Rear View RMX 4000 Rear Panel10RMX 4000 DC Rear View RTM-IPLAN 3 Cntl Following items appear on the RMX 4000 rear panelStandby button Toggle between CPU activation and standby RTM IsdnISDN/PSTN Clock Source AC Power Entry Module PEMComponent Slot Allocation DC Power Rail ModuleSlot ID/No Card/Component Requirement RTM ISDN/RTM Following items appear on the RMX 4000 front panel RMX 4000 Front Panel LEDsComponent LED Color DescriptionCard Insertion Initiated If during Card removal Initiated The cardCntl 4000 Unit RTM-IP RMX 4000 Rear Panel LEDsFollowing LEDs appear on the RTM-IP 4000 card LED Color Description NameFunction Name Following LEDs appear on the RTM LANFollowing LEDs appear on the RTM Isdn RTM IsdnComponent Replacement Component Replacement Handle Using the Modified PMC Compatible Ejector LeverReplacing the Cntl 4000 Module Replacing an AC Power Supply Module Replacing an AC Power Entry Module PEM Replacing a DC Power Rail Module PRM Component Replacement Carefully slide the Fan drawer out through the front panel Replacing the Fan DrawerInserting an Air Filter Optional in the Fan Drawer Removing the MPM+/MPMx Card from the MCU Replacing an Faulty MPM+/MPMx CardComponent Replacement Installing the Replacement MPM+/MPMx Card Replacing the RTM Isdn Card Installing an MPM+/MPMx Card on the RMXPRI Cables Replacing the RTM-IP Replacing the RTM LAN Replacing the Fabric Switch Module FSM Polycom RMX 4000 Hardware Guide