Rack Installation | Polycom Digital Signage Server Hardware Setup |
|
|
NOTE: The following installation procedures are for use with the rails and hardware provided in your ship kit. If different style rails are being used, or if your rack requires different hardware, refer to the instructions provided with your rail or rack ship kit.
NOTE: When removing the appliance from the
Step 1
•Locate the two long and six short rack brackets that came in your ship kit.
•Securely attach the set of short brackets with the threaded screw holes to the long bracket in the front as shown. Use two M4 truss head screws for each bracket.
•Loosely attach one set of the other short brackets to the long fixed bracket as shown using one M4 truss head screw on each bracket. The three holes on the flap will face toward the back for later attachment to the
•Loosely attach the remaining set of short brackets to the long fixed bracket as shown using one M4 truss head screw on each bracket. The three holes on the flap will face toward the front for later attachment to the
C | Small fixed | Long bracket |
| ||
| rack brackets |
|
B
A |
| C |
| B | |
|
| |
| Small fixed |
|
| rack brackets with | A |
| threaded holes | |
|
| |
|
| Two M4 truss |
|
| head screws |
Small fixed rack brackets
One M4 truss head screw
Step 2
•Attach the assembled brackets to the
•Insert two M5 x 12 flat head screws through the short brackets into the
Polycom, Inc. | 15 |