Polycom AP-7, AP-8, AP-6 manual Introduction, Product Summary

Avaya AP-6, AP-7, AP-8 Access Points

Introduction

Customers have reported that the WLAN products described in this document operate adequately with SpectraLink Wireless Telephones at their location using the software version listed below. For Field Verified WLAN products, Polycom has not conducted any testing and therefore cannot guarantee interoperability or performance. Polycom technical support of interoperability issues for WLAN products running versions of software not listed in the table may be subject to time and materials charges.

This document describes the configuration of the Avaya AP-6, AP-7,
and AP-8 access points (APs) for best known operation with
SpectraLink Wireless Telephones.
Product Summary
Manufacturer:	Avaya: www.avaya.com
Approved product(s):	AP-6, AP-7, AP-8
RF technology:	Direct-sequence spread spectrum, (DS)
Radio:	2.4 – 2.484 GHz (802.11b/g)
AP software version:	Firmware version 2.5.5/3.1.0 †
SpectraLink handset models: **	e340/h340/i640	8020/8030
SpectraLink radio mode:	802.11b	802.11b
Maximum telephone calls per AP:	12 *	12 *
AP configuration parameters:	See Access Point Configuration	below
Indoor range (typical):	See vendor specifications for AP
Required network topology:	Switched Ethernet
Network constraints:	Dedicated segment for wireless, single subnet
WEP capability:	Yes *
Auto-learn function:	Yes *

†Earlier and later software versions have not been validated except as noted.

*Telephone calls per AP must be configured in the system per documentation provided by Polycom.

**SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are known interoperable at one or more customer sites with the WLAN hardware and software identified in the table. Throughout the remainder of this document they will be referred to collectively as “SpectraLink Wireless Telephones”.

PN: 1725-36046-001_G.doc 3