User’s Guide for the Polycom Mobile Responder
This connector... |
|
| Enables you to... |
|
|
|
|
Camera 1 Control | 1 | Connect to an external camera, such as a Polycom | |
and Camera 1 In |
| 1 | PowerCam or PowerCam Plus. Alternatively, you can |
| |||
|
|
| use the Camera 1 In connector to connect video from |
|
|
| a VCR or DVD player. |
If you connect an external NTSC camera to the Camera 1 In connector, the Mobile Responder’s internal camera remains activated. However, if you connect an external PAL camera to the Camera 1 In connector, the internal camera is deactivated and the screen turns blue. For information on how to proceed once you have connected an external PAL camera, refer to page
LAN | Connect to an IP network. |
|
|
Connect to an external digital microphone, such as a | |
| Polycom VSX microphone array or a SoundStation |
| VTX 1000 conference phone. |
| Because the internal microphone does not send |
| stereo audio, you must connect an external digital |
| microphone if you want to send stereo audio. |
| If you connect a device to the |
| connector, the Mobile Responder’s internal |
| microphone remains activated. |
Installing the Optional QBRI, PRI, or Serial Network Module
The Mobile Responder comes standard with an IP network interface. If you want to connect to another network interface, such as ISDN QBRI, ISDN PRI, or a serial network interface (V.35,
You can continue to use IP with any of the optional network modules; however, you cannot use more than one optional network module at the same time. For example, you cannot use QBRI and V.35 at the same time.
To install the optional QBRI, PRI, or serial network module:
1.Make sure that the power is off.
2 - 6