TP-Link manual TL-PA511AV500 Mini Powerline Adapter

Page 17

TL-PA511AV500 Mini Powerline Adapter

¾Local Device(s) on your computer: This shows all local Powerline Ethernet Adapter found connected to the computer’s LAN card. In most cases, only one device will display in this panel. Click and select the local device shown on the screen then click “Connect” tab to manage the Powerline Ethernet Adapter. The status message shown above the “Connect” button indicates that your PC is connected to the same device. Once the chosen Powerline Ethernet Adapter is properly connected, this Management Utility will automatically scan the power line periodically for any other existing powerline devices. You can upgrade the version of firmware for the device by clicking the Upgrade Firmware button which is shown as below.

zPIB: Parameter Information Block. It contains configuration values that establish device network identity, general capabilities and operational modes.

zNVM: None-volatile memory. It is used for upgrading the firmware.

If you want to upgrade the version of firmware for the device, please select appropriate Firmware and PIB files together. New firmware versions and PIB files are posted at http://www.tp-link.comand can be downloaded for free.

12

Page 16 Page 18
Image 17
Page 16 Page 18
Contents TL-PA511 Copyright & Trademarks FCC Statement Important Safety Instructions Contents System Requirement Package ContentsIntroduction Status Indication LED IndicatorInterface Description Power Plug Pair Button Ethernet PortPhysical Interface Introduction Connecting MechanismConnection Instruction Hardware Connection ComputerHardware Connection Internet TL-PA511AV500 Mini Powerline Adapter Installing Management Utility TL-PA511AV500 Mini Powerline Adapter TL-PA511AV500 Mini Powerline Adapter TL-PA511AV500 Mini Powerline Adapter Main Using the Management UtilityTL-PA511AV500 Mini Powerline Adapter Rename To upgrade the devices firmware, follow these instructionsEnter Password Add Device Privacy ResetTL-PA511AV500 Mini Powerline Adapter QoS DiagnosticsTL-PA511AV500 Mini Powerline Adapter About Set Up a Secured Powerline AV Network with the Pair Button Advanced Feature How to Use the Pair ButtonsCreate a secured Powerline network using the Pair button： Pair Secure with 128 bits-AESLeave an existing secured Powerline AV Network Join an existing secured Powerline AV NetworkPower LED does not light up. Ans. Check the following Appendix a Troubleshooting GuidePowerline LED Ans. Check the following Does not light up Ethernet LED does not light up. Ans. Check the followingPhysical and Environment Appendix B SpecificationsGeneral
Top Page Image Contents