TP-Link TL-PA511 manual Add Device

Page 20

TL-PA511AV500 Mini Powerline Adapter

4.1.3 Add Device

The following dialog box will pop up when clicking the “Add” button under the Main configuration homepage. The dialog box allows you to enter both the selected device’s name and password. Note that the Powerline Adapter must be present on the power grid in order to activate the set password and added to the local network.

Enter your Device Name and Password (Take note of the password format) and click “OK” after setup.

The following screen will display after the naming and password setting process, which is also the Diagnostics configuration homepage.

15

Image 20

Contents TL-PA511 Copyright & Trademarks FCC Statement Important Safety Instructions Contents System Requirement Package ContentsIntroduction LED Indicator Status IndicationInterface Description Power Plug Pair Button Ethernet PortPhysical Interface Connecting Mechanism IntroductionConnection Instruction Hardware Connection ComputerHardware Connection Internet TL-PA511AV500 Mini Powerline Adapter Installing Management Utility TL-PA511AV500 Mini Powerline Adapter TL-PA511AV500 Mini Powerline Adapter TL-PA511AV500 Mini Powerline Adapter Using the Management Utility MainTL-PA511AV500 Mini Powerline Adapter To upgrade the devices firmware, follow these instructions RenameEnter Password Add Device Reset PrivacyTL-PA511AV500 Mini Powerline Adapter Diagnostics QoSTL-PA511AV500 Mini Powerline Adapter About Advanced Feature How to Use the Pair Buttons Set Up a Secured Powerline AV Network with the Pair ButtonCreate a secured Powerline network using the Pair button： Pair Secure with 128 bits-AESJoin an existing secured Powerline AV Network Leave an existing secured Powerline AV NetworkAppendix a Troubleshooting Guide Power LED does not light up. Ans. Check the followingPowerline LED Ans. Check the following Does not light up Ethernet LED does not light up. Ans. Check the followingPhysical and Environment Appendix B SpecificationsGeneral