TP-Link TL-PA511 manual LED Indicator, Status Indication

Page 7

TL-PA511AV500 Mini Powerline Adapter

1.1 LED Indicator

The LED indicator displays information about the device’s status.

 

Item

Status

Indication

 

 

On

The adapter is on.

 

Power LED

Blinking

The adapter is in power-saving mode.

 

Off

The adapter is off.

 

 

 

 

Green

Data rate is more than or equal to 80Mbps.

 

 

Orange

Data rate is between 48Mbps and 80Mbps.

 

Powerline LED

Red

Data rate is less than or equal to 48Mbps.

 

 

Off

The adapter isn’t connected to any powerline network or

 

 

is in power-saving mode.

 

 

 

 

 

On

The Ethernet port is connected, but there is no data

 

 

being transferred.

 

 

 

 

Ethernet LED

Blinking

The Ethernet port is transferring data.

 

 

Off

The Ethernet port isn’t connected.

) Note:

 

 

5 minutes after the device connected to the adapter is turned off, the adapter will automatically switch to the power-saving Mode.

2

Image 7
Contents TL-PA511 Copyright & Trademarks FCC Statement Important Safety Instructions Contents Introduction Package ContentsSystem Requirement Status Indication LED IndicatorPhysical Interface Power Plug Pair Button Ethernet PortInterface Description Hardware Connection Computer Connecting MechanismIntroduction Connection InstructionHardware Connection Internet TL-PA511AV500 Mini Powerline Adapter Installing Management Utility TL-PA511AV500 Mini Powerline Adapter TL-PA511AV500 Mini Powerline Adapter TL-PA511AV500 Mini Powerline Adapter Main Using the Management UtilityTL-PA511AV500 Mini Powerline Adapter Rename To upgrade the devices firmware, follow these instructionsEnter Password Add Device Privacy ResetTL-PA511AV500 Mini Powerline Adapter QoS DiagnosticsTL-PA511AV500 Mini Powerline Adapter About Pair Secure with 128 bits-AES Advanced Feature How to Use the Pair ButtonsSet Up a Secured Powerline AV Network with the Pair Button Create a secured Powerline network using the Pair button:Leave an existing secured Powerline AV Network Join an existing secured Powerline AV NetworkEthernet LED does not light up. Ans. Check the following Appendix a Troubleshooting GuidePower LED does not light up. Ans. Check the following Powerline LED Ans. Check the following Does not light upGeneral Appendix B SpecificationsPhysical and Environment