TP-Link TL-R480T+ manual Logs, DST Status, Predefined Mode, Recurring Mode, Date Mode

The following items are displayed on this screen:

Daylight Saving Time(DST) State Show the work state of DST.

Daylight Saving Time(DST) Config

DST Status:	Enable or disable the DST.
Predefined Mode:	Select a predefined DST configuration.
	 USA: Second Sunday in March, 02:00 ~ First Sunday in November,
	02:00.
	 European: Last Sunday in March, 01:00 ~ Last Sunday in October,
	01:00.
	 Australia: First Sunday in October, 02:00 ~ First Sunday in April, 03:00.
	 New Zealand: Last Sunday in September, 02:00 ~ First Sunday in April,
	03:00.
Recurring Mode:	Specify the DST configuration in recurring mode. This configuration is
	recurring in use.
	 Time Offset: Specify the time adding in minutes when Daylight Saving
	Time comes.
	 Start/End Time: Select the start time and end time of Daylight Saving
	Time. The start time is standard time, and the end time is Daylight
	Saving Time.
Date Mode:	Specify the DST configuration in Date mode. This configuration is one-off in
	use.
	 Time Offset: Specify the time adding in minutes when Daylight Saving
	Time comes.
	 Start/End Time: Select the start time and end time of Daylight Saving
	Time. The start time is standard time, and the end time is Daylight
	Saving Time.

Note:

●When the DST is disabled, the predefined mode, recurring mode and date mode cannot be configured.

●When the DST is enabled, the default daylight saving time is of European in predefined mode.

4.8.7Logs

The Log system of router can record, classify and manage the system information effectively.

Choose the menu Maintenance→Logs→Logs to load the following page.

-115-