TP-Link TL-R480T+ manual Mode,  Port Mirror, Mirroring Port, Mirrored Port

Page 50

Mode:	Select the mode for the port mirror function. Options include:
	 Ingress: When this mode is selected, only the incoming packets
	sent by the mirrored port will be copied to the mirroring port.
	 Egress: When this mode is selected, only the outgoing packets sent
	by the mirrored port will be copied to the mirroring port.
	 Ingress&Egress: When this mode is selected, both the incoming
	and outgoing packets through the mirrored port will be copied to the
	mirroring port.
 Port Mirror
Mirroring Port:	Select the Mirroring Port to which the traffic is copied. Only one port can
	be selected as the mirroring port.
Mirrored Port:	Select the Mirrored Port from which the traffic is mirrored. One or multiple
	ports can be selected as the mirrored ports.

The entry in Figure 4-16indicates: The outgoing packets sent by port 1, port 2, port 3 and port 5 (mirrored ports) will be copied to port 4 (mirroring port).

Tips:

If both the mirrored port and the mirroring port are the LAN ports, these two LAN ports should be in the same Port VLAN. For example, if port 3 (the mirroring port) and port 4 (the mirrored port) are the LAN ports, the Port Mirror function can take effect only when port 3 and port 4 are in the same Port VLAN.

-44-

Image 50

Contents TL-R480T+ Load Balance Broadband Router Copyright & Trademarks FCC Statement Safety Information 安全諮詢及注意事項Contents Hardware Specifications 119 120Glossary 122 Appendix CPackage Contents Overview of this Guide Intended ReadersConventions Page Overview of the Router Hardware Features Easy-to-use Basic FunctionsAppearance Front PanelRear Panel  Reset button AC Power Receptacle  Interface Description PortQuick Installation Guide Configure PCPage Page Is the connection between your PC and the router correct? LoginIs the TCP/IP configuration for your PC correct? WAN Mode 11 WAN Connection Type Page Page 17 Configuration Completed Configuration StatusNetwork Quick SetupWAN Mode 1 WANStatic IP  Static IPSecondary DNS Default GatewayPrimary DNS Upstream BandwidthWAN Dynamic IP Following items are displayed on this screen  Dynamic IPUse the following DNS Get IP Address byUnicast ServerPPPoE WAN PPPoESettings Keep Alive PasswordActive Mode Account NameSecondary Connection Service NameISP Address Connection Type PPPoE Status L2TP WAN L2TP L2TP Settings Server IP L2TP Status UpstreamBandwidth Downstream Bandwidth Pptp  Pptp Settings Secondary Connections Pptp Status  BigPond Settings BigPondPage  BigPond Status 2 LAN2.1 LAN Dhcp  LAN Dhcp Settings Dhcp ClientDhcp Reservation  Dhcp ReservationIptv  List of Reserved AddressSet the MAC Address for WAN port MAC AddressSet the MAC Address for LAN port  MAC Address SwitchStatistics Port15 Statistics Following items are displayed on this screen  StatisticsPort Mirror  GeneralMirroring Port Mode Port Mirror Mirrored PortRate Control Application Example Rate Control Port Config Port Config Port Status Port Vlan Port Vlan User GroupGroup User View View Config View1 NAT NAT SetupAdvanced  List of Rules One-to-One NAT One-to-One NAT Multi-Nets NAT  Multi-Nets NATApplication Example  Network Requirements  Configuration procedure Interface Virtual Server Virtual Server ProtocolPort Triggering  Port Triggering 1.6 ALG  ALG323 ALG SetupTraffic Control IPsec ALGIs available to use  Interface BandwidthDirection GuaranteedBandwidth Control GroupSession Limit Session Limit List of Session Limit Session List Session Limit Policy Routing ConfigurationLoad Balance WAN Link Backup 36 Link Backup Following items are displayed on this screen Protocol  Protocol RoutingStatic Route  List of Protocol38 Static Route Following items are displayed on this screen  Static RouteApplication Example  Network Requirements IP-MAC Binding FirewallAnti ARP Spoofing  IP-MAC Binding ARP Scanning 40 ARP ScanningAttack Defense ARP ListDefense Flood DefensePacket Anomaly Defense Logs Enable AttackMAC Filtering  MAC FilteringAccess Control URL Filtering URL Filtering Rule ObjectAccess Rules Web FilteringPolicy  Access RulesService  List of Rules Name Service Service Dest. PortControl Rules  List of ServiceApp Control Application Database Control Rules General ServicesPPPoE Server Page  IP Address Pool IP Address PoolAccount  List of IP Pool52 Account Following items are displayed on this screen  Account Account Name List of Account Is 48. If Enable Advanced Account Features is not selected,Exceptional IP  List of Exceptional IP List of Account Exceptional IP Bulletin IntervalDynamic DNS Enable LogsContent TitleDynDNS 56 DynDNS Ddns List of DynDNS Account No-IP Dyndns Ddns 57 NO-IP Ddns Following items are displayed on this screen  No-IP DdnsPeanutHull  List of No-IP Account List of PeanutHull Account Comexe PeanutHull Ddns 59 Comexe Ddns Following items are displayed on this screen  Comexe Ddns List of UPnP Mapping UPnP List of Comexe Account Administrator MaintenanceAdmin Setup  AdministratorLogin Parameter Remote Management Export and Import Factory DefaultsManagement  Remote Management Export Reboot Configuration Version  ImportFirmware Upgrade Snmp68 Snmp Following items are displayed on this screen IP Traffic Statistics StatisticsInterface Traffic Statistics Interface Displays the interface IP Fragment Rx Traffic Statistics DiagnosticsDiagnostics  IP Traffic Statistics71 Diagnostics Following items are displayed on this screen  PingDetecting Online Detection Tracert Ping List of WAN status TimeTime  Current TimeManual Daylight Saving TimeGet UTC Synchronize withDate Mode Predefined ModeRecurring Mode LogsSend System Logs  List of LogsSeverity Level DescriptionLevel Description Debugging  Filter SettingNAT Table  NAT TablePage Transmission Medium PowerPorts LEDsAppendix B FAQ Page Appendix C Glossary Glossary DescriptionAllows dissimilar communication devices to communicate Port or device that connects to a LAN. Other devices Glossary Description

Related manuals

Manual 95 pages 2.83 Kb