IP Address: | If Static IP is selected, configure the IP address of WAN port. |
| If Dynamic IP is selected, the IP address of WAN port |
| obtained is displayed. |
Subnet Mask: | If Static IP is selected, configure the subnet mask of WAN |
| port. If Dynamic IP is select, the subnet mask of WAN port |
| obtained is displayed. |
Default Gateway: | If Static IP is selected, configure the default gateway. If |
| Dynamic IP is selected, the obtained default gateway is |
| displayed. |
Primary DNS/Secondary DNS: If Static IP is selected, configure the DNS. If Dynamic IP is | |
| selected, the obtained DNS is displayed. |
Upstream | Specify the bandwidth for transmitting packets on the port. |
Bandwidth: |
|
Downstream Bandwidth: | Specify the bandwidth for receiving packets on the port. |
L2TP Status |
|
Status: | Displays the status of L2TP connection. |
| “Disabled” indicates that the L2TP connection type is |
| not applied. |
| “Connecting” indicates that the router is obtaining the IP |
| parameters from your ISP. |
| “Connected” indicates that the router has successfully |
| obtained the IP parameters from your ISP. |
| “Disconnected” indicates that the connection has been |
| manually terminated or the router gets no response from |
| your ISP. Please ensure that your settings are correct |
| and your network is connected well. Consult your ISP if |
| this problem remains. |
IP Address: | Displays the IP address assigned by your ISP. |
|