TD-8817
ADSL2/2+ Ethernet/USB Router User Guide
Method two：Restore the default setting from
¾LAN: Through the port, you can connect the Router to your PC or the other Ethernet network devices.
¾USB: Connect with your computer’s USB interface
¾LINE: Through the port, you can connect the Router with the telephone.
2.3Installation Environment
¾The Product should not be located where it will be exposed to moisture or excessive heat.
¾Place the Router in a location where it can be connected to the various devices as well as to a power source.
¾Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard.
¾The Router can be placed on a shelf or desktop.
2.4Hardware installation procedures
The procedure to install the Router can be described in the following steps:
First Step: Connect the Modem port of Splitter with the LINE port of the Router by telephone line.
Second Step: Connect category 5 cable with RJ45 jacks to Router’s LAN port and your computer’s NIC. Or connect USB cable to ADSL2+ Router’s USB port and your computer’s USB interface. ( When you connect your PC to the Router through the USB port, please install the USB driver first. For the detailed operation please refer to “3.2 USB Configuration” in User Guide.)
Third Step: Plug one end of the provided AC Power Adapter( 9V/ 0.8A ) into the Power jack on the Router and the other end to a standard electrical outlet( 220V～50/ 60HZ ).
Last Step: Check the line connection to see if everything is ready. Power up finally.
4