TP-Link TD-8817 manual Advanced Setup, Firewall, Routing

Page 30

TD-8817

ADSL2/2+ Ethernet/USB Router User Guide

4.4Advanced Setup

Choose “Advanced Setup”, you can see the next submenus:

Figure 4-12

Click any of them, and you will be able to configure the corresponding function.

4.4.1 Firewall

Choose “Advanced SetupFirewall” menu, and you will see the next screen (shown in Figure 4-13).

Figure 4-13

¾Firewall: Select this option can automatically detect and block Denial of Service (DoS) attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack.

¾SPI: If you enable SPI, all traffics initiated from WAN would be blocked, including DMZ, Virtual Server, and ACL WAN side.

4.4.2 Routing

Choose “Advanced SetupRouting” menu, and you will see the routing information in the next screen (shown in Figure 4-14).

24

Image 30
Contents TD-8817 ADSL2/2+ Ethernet/USB Router Copyright & Trademarks FCC Statement Package contents Chapter Software Configuration Hardware InstallationQuick Installation Guide IntroductionAppendix a Specification Main Features Product OverviewTD-8817 Conventions Front Panel Back PanelInstallation Environment Hardware installation proceduresADSL2/2+ Ethernet/USB Router User Guide Quick Installation Guide Configure PCADSL2/2+ Ethernet/USB Router User Guide Configure the IP address as -4 shows. After that, click OK Is the TCP/IP configuration for your PC correct? USB ConfigurationUSB Drive installation procedures Is the connection between your PC and the Router correct?ADSL2/2+ Ethernet/USB Router User Guide Login ADSL2/2+ Ethernet/USB Router User Guide ADSL2/2+ Ethernet/USB Router User Guide Click Next to finish the Quick Start Software Configuration StatusInterface Setup Quick StartInternet Dynamic IP Address Static IP Address PPPoA/PPPoEBridge Mode 2 LAN ADSL2/2+ Ethernet/USB Router User Guide ADSL2/2+ Ethernet/USB Router User Guide Advanced Setup FirewallRouting 3 NAT DMZ Virtual ServerTo add a virtual server entry Other operation for the entries are as followADSL2/2+ Ethernet/USB Router User Guide 4 QoS To add a mapping ruleADSL2/2+ Ethernet/USB Router User Guide Vlan Assign Vlan Pvid for each Interface Define Vlan GroupAdsl Access Management 1 ACLFilter IP FilterADSL2/2+ Ethernet/USB Router User Guide To add an IP Address filtering entry ADSL2/2+ Ethernet/USB Router User Guide MAC Filter To add a MAC Address filtering entryADSL2/2+ Ethernet/USB Router User Guide ADSL2/2+ Ethernet/USB Router User Guide To add a URL filter entry Other operation for the entries as shown in FigureSnmp UPnPDdns CwmpMaintenance AdministrationTime Zone NTP Server automaticallyFirmware PC’s ClockManually To back up the Router’s current settings To restore the Router’s settings System RestartDiagnostic HelpADSL2/2+ Ethernet/USB Router User Guide General Physical and Environment