ZyXEL Communications omni.net LCD series quick start Create a PPP Connection

omni.net LCD series Quick Start Guide

Click the COM Port that is connected to your TA. Select one COM Port only.

Click OK.

Create a PPP Connection

At this point, you very close to accessing the Internet. Follow the instructions below to create a new Dial-up Connection.

Step 1. Double-click on the My Computer icon, double-click on the Dial-up Network icon and then double-click on Add New Dial-up Connection.

Step 2. Give a name to this Dial-up Connection, for example, “omni.net LCD TA” for identification purposes. Double-click on your new TA icon as the device to connect to the Internet and then click Next.

Step 3. Enter your ISP's phone number and then click Next.

Step 4. Click Finish. Click on your recently created icon to connect to the Internet.

Step 5. Congratulations, you have completed PPP setup and can now access the Internet using your new TA! To test your connection and find out more about ZyXEL’s exciting products visit www.zyxel.com .

5-6