ZyXEL Communications RS-1612 manual Message Display, Contrast Menu

Page 32

ZyXEL RS-1612 >>

VER : 1.0

IP = 203.66.113.10

Figure 4-3 Main Display

Message Display

The message display shows brief messages sent by the supervisor to the rack. Pressing the Right Arrow Key from the Main Display accesses the Message Display. The Message Display is read-only.

<< MESSAGE >>

IP = 203.66.113.10

Figure 4-4 Message Display

Contrast Menu

The Contrast Menu lets you adjust the LCD display contrast. To adjust the contrast:

1.Press the Right Arrow Key when the Message Display is showing to show the Contrast Menu.

2.Press the Enter Key to access the menu.

3.Press the Left and Right Arrow Keys to adjust the contrast.

4.Press the Enter Key to accept the change.

5.Press the Menu Key to see the Rack Slot Menu.

22

Image 32
Contents JiH5 ZyXEL Limited Warranty Acknowledgments FCC Part 15 InformationCopyright 1997 by ZyXEL Information for Canadian Users Declarations of CE marking Contacting ZyXEL ∙ E-mailVii Contents Setting up the RS-1612 Rack NMS Overview Configuring the RS-1612 rackControl Card RS-1612 Menu Tree 19 Rack Slot Menu 20 Modem MenuPage Introduction What This Manual CoversOther Resources Packing List∙ U-336R/RE Users Guide ∙ ZyViewII User’s Guide∙ One Menu Tree Guide ∙ One Warranty Registration Card Page Control Panel RS-1612 Control PanelPower Supply LEDs Rear PanelFuse Pin Assignment Purpose DTE RS-232 PortsTerminal Blocks Power Switch DC Power TerminalsAC-DC switch Power SocketControl Card 10Base2, 10Base5, 10Base-TSetting up the RS-1612 Rack Modem CardPhone Lines Connecting to ComputersHooking Up Power Configuring the RS-1612 rack NMS OverviewSetting Rack Security NMS related CI commands Command DescriptionChecking the connection Nms mask add IP address mask and press EnterIP address configuration Command Description Page Operation RS-1612 Menu TreeRack Slot Menu Modem MenuMain Display Modem MenuMessage Display Contrast MenuSetting the RS-1612 Modem Reset MenuSetting the Display Contrast Resetting the Rack to its Default SettingsUpgrading firmware Unlocking a Rack Locked by a NMSSetting Modems Setting Modems with the Control Panel Resetting Modems to Factory DefaultsChanging Modem Cards