ZyXEL Communications IES1248 manual IES-1248 Authenticator settings, Radius settings

Page 24

IES 1248 Support Notes

environment. The Microsoft 802.1x client and ZyXEL Vantage 50 will be used as supplication and RADIUS, respectively. Following sections will describe the detailed procedure to set up the environment.

1.IES-1248 (Authenticator) settings:

1.1 RADIUS settings:

Click Advanced Application, Port Authentication in the navigation panel to display configuration screen as shown. Click Enable Authentication Server and set the RADIUS server IP address, UDP port and shared Secret, which is the same as Radius server. Then click Apply to make the settings take effect.

Click the 802.1x link to enter the 802.1x settings. Check the Enable Authentication and click Apply button to enable 802.1x authentication. Check Enable to turn on 802.1x authentication on that port. You can leave other settings as default values. Click Apply to save your changes.

24

All contents copyright (c) 2006 ZyXEL Communications Corporation.

Image 24
Contents IES1248 IES 1248 Support Notes Trouble Shooting How to apply the profile to ports IES-1248 SettingsProvide Different DSL Port Speeds to different subscribers Internet IES-1248IES 1248 Support Notes Profile Assignment IES 1248 Support Notes Prestige 660R-61 Settings Check the values above are the same as the IES-1248 How to configure 802.1Q Vlan How to set up a Vlan environment Adsl AdslIES 1248 Support Notes Pvid settings Triple play Application How to set up a Multiple PVCs environment InternetVC profile setup Multiple PVCs setup Prestige 660R-61 Settings ES-2024 settings IES 1248 Support Notes Pvid setup IES 1248 Support Notes Authentication Server Radius How to set up an 802.1x environment802.1x Application Application serverIES-1248 Authenticator settings Radius settingsVantage 50RADIUS settings Radius server setupWindows XPSupplicant settings 802.1x/MD5-challenge setupIES 1248 Support Notes Setting up the Syslog Server How to set up a Syslog serverInstall and Run Kiwi’s Syslog Server Network IES-1248IES-1248 settings Setting up the Ring Environment How to set up a Ring Environment AdslENET2 port Setup IES2000 Enable Spanning Tree protocol Click Uplink2 to set up this port Check Spanning Tree Protocol to enable it Setup ES4024 Enable Spanning Tree protocol on Ethernet ports Results Setting up the Igmp Snooping/IGMP Filtering InternetServer Ethernet Port PortHow to set up Igmp snooping/IGMP filtering IES-1248 settings Enable Igmp SnoopingSet up Igmp Filtering What is Static Multicast Filter? Static MulticastApplication Scenario How to configure Static Multicast filter IES 1248 Support Notes IES 1248 Support Notes IES 1248 Support Notes Limit the users behind the certain DSL port PC 1 PC How to set up MAC Filter/Port Security IES-1248 settings 1.1 Set up MAC filterSet up Port Security Dhcp Relay Option 82 Application Dhcp Client How to set up Dhcp Relay Option 82 Environment NetworkServer CPE settings IP Commander settingsIES 1248 Support Notes IES 1248 Support Notes IES 1248 Support Notes IES 1248 Support Notes IES 1248 Support Notes IES 1248 Support Notes IES 1248 Support Notes Rule creation has been finished Client How to Filter Some Specific Packet Filter Some Certain PacketNetwork Client IES 1248 Support Notes Cascade two IES1248 Daisy chain mode How to setup Daisy-chain modeInternet Vlan Application How to configure Vlan IES 1248 Support Notes Port 23, fixed, Tx tagging Port 2, port For Switch B on Floor Please set static Vlan 10 port 23, fixed, untag IES 1248 Support Notes Application Scenario C Port 23, fixed, Tx tagging Port 2, port For Switch B on Floor IES 1248 Support Notes Vlan ID IES 1248 Support Notes IES 1248 Support Notes IES 1248 Support Notes What is the maximum line rate of IES1248 ? What is the difference between IES1248-71 and IES1248-73 ?What is the power requirement of IES- 1248? What is the Adsl chipset of IES1248?What kind of the features that IES 1248 supports ? What is the default console rate of IES1248 ?How many static Vlan entries can IES1248 support ? How many VLANs can each Adsl port of IES1248 join ?IES 1248 Support Notes Trouble Shooting IES 1248 Support Notes How to reset this device as factory default? WEBIES 1248 Support Notes MSC 1000 atlc Starting Xmodem upload CRC mode Cccc Å Send file to MSC via 1K-Xmodem when see this messageWEB IES 1248 Support Notes Which new version I should upgrade? XDSL link fail?Forgot the Password, how do I recover it? Can not access the Dslam via console port. What should I do?Alarm Led is always on, what should I do?