ZyXEL Communications IES1248 manual IES 1248 Support Notes

IES 1248 Support Notes

6. For port 2, set it as non-member of channel 2 “01:00:5e:02:02:02”

7.For port 3, no need to change anything because its status as member of these channels by default. Don’t forget to click “Config Save” to save your configuration into flash.

CLI Command related:

switch	Smcast			Use the static
				multicast filter
		show		Display all MAC
				addresses joined to
				ADSL ports
		set	<adsl port> <multicast	Use joinleave to
			MAC> <joinleave>	add/remove multicast

45

All contents copyright (c) 2006 ZyXEL Communications Corporation.