Lindy KVM IP features front and rear

LINDY KVM IP features - front and rear

Considering its capabilities, the LINDY KVM IP is supplied within a remarkably compact casing. Measuring just 198mm x 120mm x 43mm, it occupies just half of a single (1U) rack space and provides most of its connectors at the rear face. The smart front face features the IP network port and the operation indicators.

IP network port

This intelligent Ethernet port can automatically sense whether it is attached to a 10Mb or 100Mb network.

Access Switch Plus

LOC REM VNC 100 LNK PWR

Modem port	Configuration	Power control port
Optionally use this	switches	Optionally use this port
port to attach either	Used for flash	to control one or more
a standard modem or	upgrades and	power switches. These
an ISDN adapter. This	total reset	allow the remote user to
feature provides an	functions. They	take full control of the
alternative, direct-dial,	are not required	host system(s).
remote link into the	under normal
LINDY KVM IP.	circumstances.

MODEM

INDOOR

USE ONLY

POWER CONTROL

1 2 ON

A	B	1 2	K/M	DVI	VGA	DVI	VGA	K / M	V M

5V	2A	CFG		KVMA CONSOLE			COMPUTER / KVMA SWITCH

   

Indicators

These six indicators clearly show the key aspects of operation:

•LOC Keyboard or mouse data are being received from the local console.

•REM Keyboard or mouse data are being received from a remote viewer.

•VNC Indicates that a remote viewer is connected and active.

•100 Indicates the Ethernet network speed (10/100Mbs).

•LNK Network link and activity indication.

•PWR Power indicator.

Dual power inputs Connect one or two power adapters here. When two units are connected, load is shared between them.

KVMA console

Devices connected here allow you to perform the initial configuration of the LINDY KVM IP. Additionally, you can use these to locally control the connected computer(s).

Keyboards and mice can be either USB or PS/2, the video monitor can be DVI digital or analog (via a converter plug) plus stereo speakers.

Computer/KVMA Switch

Link these connectors to the keyboard and mouse (USB or PS/2), DVI digital or analog video and speaker ports of the device to be remotely controlled, either a single computer or a KVM switch. The USB port on the right is used by the Virtual Media feature to allow remote file transfer, and can be connected to a standard USB port.

