LINDY CPU IP Access Switch | User Manual |
2. Hardware Setup
2.1 Front View
1.Reset / Firmware Upgrade Switch
•Pressing and holding this switch in while powering ON the CPU IP ACCESS SWITCH resets it to the factory default firmware level
•After the CPU IP ACCESS SWITCH has been powered ON, pressing and holding this switch in for more that two seconds performs a system reset
Note: This switch is recessed and must be pushed with a thin object – such as the end of a paperclip, or a ballpoint pen.
2.10/100 Mbps Data LED
•The LED lights GREEN to indicate 10 Mbps data transmission speed
•The LED lights ORANGE to indicate 100 Mbps data transmission speed
3.Link LED
Flashes GREEN to indicate that a Client program is accessing the device.
4. Power LED
Lights when the CPU IP ACCESS SWITCH is powered up and ready to operate.
6