LINDY CPU IP Access Switch | User Manual |
5. The Java Client
The Java Client is provided to make the CPU IP ACCESS SWITCH accessible to all platforms. Systems that have Java installed can connect. If you don’t already have Java, it is available for free download from Sun’s Java web site (http://java.sun.com).
5.1Starting Up
1.Insert the CPU IP ACCESS SWITCH software CD into your
2.Open the drive and folder where the Java Client jar file (CN6000main.jar) is located and copy the file to your hard disk
3.To bring up the Java Client Main Screen, run the Java Client jar file (CN6000main.jar) either by double clicking its icon, or by keying in the full path to it on the command line.
Note: The Java Client requires Java version 1.4 or higher. It will not work with earlier versions of Java.
If this is the first time that you are running the program, a dialog box appears requesting you to input your serial number.
4.Key in the serial number - 5 characters per box - then Click OK. (If you don’t know what it is, contact the CPU IP ACCESS SWITCH administrator.)
An Address Input dialog box appears:
5.Key in the IP address for the unit you want to connect to - including a forward slash followed by the name of the CPU IP ACCESS SWITCH’s Java Client web page.
For example:
168.10.95.1/cn6k.html
Note: For security purposes, the name of the page that you connect to must be specified correctly as part of the IP address. The system administrator may change the name of this page from time to time to thwart unauthorized access attempts. Be sure you have the correct name for this page when you attempt to connect.
39