LINDY CPU IP Access Switch | User Manual |
3.2 Starting Up
Run the program either by double clicking its icon, or by typing the path to CN6kAdminTool_x_x_xxxLindy.exe on the command line. If this is the first time that you are running the utility a dialog box appears requesting you to input your serial number. The serial number can be found printed on the
The Administrator Utility attempts to find all the CPU IP ACCESS SWITCH devices installed on the local LAN segment. When it has finished searching, it displays a device selection window similar to the one below:
CPU IP ACCESS SWITCH devices on the local LAN segment found by the Administrator Utility are displayed in the large central listbox.
•If the unit you wish to configure appears in the listbox, double click it.
•If the unit you want doesn’t appear in the listbox, key in its IP address in the CPU IP ACCESS SWITCH address field, and its Port number in the Port box, then Click Login.
Note:
1.The Port number that corresponds to a unit’s IP address is set by the Administrator on the Network configuration page (see p. 15 for details).
2.Clicking the Refresh button causes the utility to rescan the local LAN segment for CPU IP ACCESS SWITCH devices.
3.If the utility fails to connect to a unit that you specified, it assigns another free IP address (if one exists), to that device and attempts to connect again.
4.When the Administrator Utility searches for CPU IP ACCESS SWITCH devices, if it finds them in different network segments (one at 10.0.0.xxx, and another at 216.0.0.xxx, for example), it will attempt to substitute a dynamic IP address (10.0.0.111, for example).
11