Lindy 39401 user manual Administrator Utility, Windows Client

LINDY CPU IP Access Switch		User Manual
The Administrator Utility
	Problem	Solution
	The default CPU IP ACCESS	1. When the CPU IP ACCESS SWITCH starts, if it doesn’t find
		a DHCP environment after 30 seconds, it automatically sets its
	SWITCH IP address is determined
		IP address to 192.168.0.60. Connect to it at that address, and
	by DHCP. My network uses fixed
		change its Network settings to a fixed IP address.
	IP addresses. How can I access
	the CPU IP ACCESS SWITCH to	2. You can use the ARP function to assign a fixed IP address to
	give it a fixed IP address?
		the CPU IP ACCESS SWITCH. See p. 15 for details.
		Turn off the power; short jumper labelled Password Default on
		the CPU IP ACCESS SWITCH’s mainboard; turn on the power
	Forgot/Corrupt Password	and wait for all the LEDs to blink; turn off the power and open
		the Password Default jumper; start the CPU IP ACCESS
		SWITCH up.

The Windows Client

Problem	Solution
Remote mouse pointer is out of	1. Use the AutoSync feature (see Video Adjustment, p. 37), to
	synch the local and remote monitors.
step.
	2. If that doesn’t resolve the problem, use the Adjust Mouse
	feature (see Mouse Movement, p. 35) to bring them back in step.
Part of remote window	If Keep Screen Size (see p. 32) is not enabled, use the
is off my monitor.	AutoSync feature (see Video Adjustment, p. 37), to synch the
	local and remote monitors. If it is enabled, see the discussion
	under Config on p. 32.
The remote screen	Enable Keep Screen Size. See the discussion under Config on p.
display is rotated 90°	32 for details
I can’t run Net Meeting	Enable Keep Screen Size. See the discussion under Config on p.
when the Windows
	32 for details.
Client is running.

56