Lindy 25120 user manual Software Installation Optional, CD Drive Letter\eth\setup.exe

Page 4

Manual

Software Installation (Optional)

Note: Windows may look different on other platforms!

1.Do not connect the Ethernet Bridge to your computer yet! Insert the CD into your CD-ROM drive. If the CD doesn’t automatically load, run -

<CD Drive Letter>:\eth\setup.exe

Click on ‘Next’ to start the installation

2.Enter a User Name and Organisation, and select either ‘Anyone who uses this computer’ or ‘Only for me’, according to your preference.

Click ‘Next’ to continue.

3.Review or change your installation settings, then click ‘Install’.

LINDY HomePlug Ethernet Bridge

Page 4

Image 4

Contents HomePlug Ethernet Bridge Introduction About Lindy HomePlug devicesUnderstanding HomePlug Encryption and Security Basic requirements for setting up a HomePlug networkSupplied Items Lindy Part No Software Installation Optional CD Drive Letter\eth\setup.exeHomePlug Ethernet Bridge’ on page 6. Click ‘OK’ to continue Connecting the HomePlug Ethernet Bridge Front View Rear ViewHomePlug Configuration Utility Network section MAC AddressData Rate Scan HomePlugSecurity section All of the HomePlug devices on the networkRemote Passwords Device PasswordAdvanced section AddSetting the network password Manual Manual Radio Frequency Energy