Peavey CS 1800G Output Power typical value, Rated Output Power, Power Bandwidth typical value

SPECIFICATIONS

Output Power: (typical value)

(@ 120 VAC, 60 Hz)

Stereo mode, both channels driven:

2 ohms, 1 kHz, 1% THD: 900 W RMS per channel

4 ohms, I kHz, 1% THD: 600 W RMS per channel

8 ohms, 1 kHz, 1% THD: 350 W RMS per channel

Bridge mode. mono:

4 ohms, 1 kHz, 1% THD: 1800 W RMS

8 ohms, 1 kHz, 1% THD: 1200 W RMS

Rated Output Power:

(@ 1 2 0 V A C , 6 0 H z )

Stereo mode, both channels driven:

4 ohms, 20 Hz to 20 kHz, 0.04% THD: 550 W RMS per channel

8 ohms, 20 Hz to 20 kHz, 0.04% THD: 300 W RMS per channel

Power Bandwidth: (typical value)

Stereo mode, both channels driven

@ rated power, 4 ohms, ~0.1% THD: 10 Hz to 40 kHz

Slew Rate: (typical value)

Stereo mode, each channel: 40 volts per pSec

Bridge mode, mono: 80 volts per ySec

Total Harmonic Distortion: (typical)

Stereo mode, both channels driven:

20 Hz to 20 kHz, 4 ohm rated load: Less than 0.04%

Input Sensitivity & Impedance:

Input attenuator set @ FCW:

@rated output power, 4 ohms: 1 .O V RMS (0 dBV), 20 k ohms (+33 dB)

Frequency Response: (typical value)

Stereo mode, both channels driven:

+0,-l dB, 1 W RMS, 4 ohms: IO Hz to 40 kHz

+O, -0.2 dB @ rated output, 4 ohms: 20 Hz to 20 kHz

Damping Factor: (typical value)

Stereo mode, 8 ohms, I kHz: Greater than 300

Hum & Noise:

Stereo mode, below rated power, 4 ohms: 100 dB, unweighted

Power Consumption:

Stereo mode, both channels driven:

@rated output power, 4 ohms: 13 A @ 120 V AC,

6.8 A @ 230 V AC

Cooling System:

Dual 2 speed fans

DDTTM Compression System:

Switchable with LED

Dimensions & Weight:

Height: 3.50” (8.9 cm)

Width: 19” (48.3 cm)

Depth 17” (43.2 cm)

Weight 35 lbs. (15.9 kg)

Two Rack Space, Class BG, Dual Rail Design With NSSER Topology

(NSSER: non-saturating series single emitter resistor)

Patent Pending.

Due to our efforts for constant improvements,

,features and specifications listed herein are subject to change without notice.

9