IOGear GCS1712 user manual Setup and Installation, Step Power Adapter / Console Connection

Page 12

Installation

Setup and Installation

Step. 1 (Power Adapter / Console Connection)

* Before you begin, please make sure that the power to all devices has been turned off.

1.Plug your USB Mouse, USB Keyboard, and Monitor into the console area at the front of the KVMP Switch

2.Plug the Monitor into the console area at the back of the switch, and then the power adapter into the power adapter port.

9

Image 12

Contents USB KVM Page IOGEAR. All Rights Reserved. PKG-M0014v2 Table of Contents Package Contents Overview OverviewFeatures FeaturesAccessories RequirementsSystem Requirements Introduction Introduction to MiniViewTM III USB KvmpFront View Back View Installation Setup and InstallationStep Power Adapter / Console Connection Step Cable Connection Installation Operation OperationHotKey Operation Selecting the Active PortAssigning USB Peripherals Hot Key Summary TableOSD Operation OSD Navigation OSD Menu HeadingsNavigation Function KeysF9 Auto Scan SET Channel Display Factory Default Settings See Table Below SET PasswordPassword not Match OSD SecurityHotKey Commands Summary Model GCS1712/1714 AppendixTroubleshooting Model GCS1712/GCS1714 Specification Product Specification Model GCS1712/1714Product Specification Contd. Model GCS1712/1714 Radio & TV Interference Statement Radio & TV Interference StatementLimited Warranty Limited WarrantyPage Page Contact info