KTI Networks KS-801 manual Installing the Switch, Packing List

Page 10

2. Installing the Switch

The switch is designed to operate in workgroup environments without a complicated configuration procedure. It also features an auto-select 100- 240V, 50/60Hz power supply unit, which works in most countries around the world.

Before connecting the supplied power cord into the switch, check to see that the cord voltage and current rating conform to the standards of the country of operation.

2.1 Packing List

The switch has the following components shipped with it:

•One switch unit

•One AC power cord

•One RS232 console cable

•19-inch rack mount kit

•CD for installation guide, software modules, MIB file and software operation manuals

-10-

Image 10

Contents Installation Guide KS-801International Fax 886-2-26983873 Mail Kti@ktinet.com.tw Port Fast Ethernet Managed Switch with Fiber Connectivity Installation GuideTrademarks Table of Contents Introduction Features Page Specifications Installing the Switch Packing ListFiber Slot 100M Fiber slot for Port #9 LED indicators PanelsMounting the Switches Network Switched Ports Making Network Connections10/100BASE-TX Fast Ethernet Switched Ports Manual Configuration Switch can support connections to the following devices10/100BASE-TX Fast Ethernet Ports Straight-through and Crossover UTP Cable Module Connector type Fiber cable Maximum length Fast Ethernet Fiber SlotPage Duplex Mode Setting SpecificationsSwitch supports the following trunk configurations Making Trunk ConnectionsPage Making Sniffer LED Panels LED IndicatorsInterpretation Performing Network Management Management SupportLogin Port Status Management objectsConsole Management Setting IP AddressConsole interface consists of a series of menu list Telnet Management Web ManagementConsole port does not support modem connection Upgrade Firmware Snmp ManagementSupport