KTI Networks KS-801 manual Making Network Connections, Network Switched Ports

Page 13

3. Making Network Connections

3.1 Network Switched Ports

The following figure illustrates the switched ports provided on the switch. The switch comes with nine Fast Ethernet switched ports and Port #9 provides two connection types, one is 10/100BASE-TX RJ-45 connector and the other is 100BASE-FX fiber slot. The Fast Ethernet fiber slot can accommodate one optional Fast Ethernet fiber module.

The following table lists the connectors provided on each network ports:

Port #

Standard

Connector type

Mark

Port 1-8

10/100BASE-TX

MDI-X RJ-45

1X - 8X

Port 9

10/100BASE-TX

RJ-45

9X

 

 

(crossover SW defines RJ-45 type)

Port 9

100BASE-FX

100 Fiber Slot

100BASE-FX

-13-

Image 13
Contents KS-801 Installation GuideInternational Fax 886-2-26983873 Mail Kti@ktinet.com.tw Installation Guide Port Fast Ethernet Managed Switch with Fiber ConnectivityTrademarks Table of Contents Introduction Features Page Specifications Packing List Installing the SwitchPanels Fiber Slot 100M Fiber slot for Port #9 LED indicatorsMounting the Switches Making Network Connections Network Switched Ports10/100BASE-TX Fast Ethernet Switched Ports Manual Configuration Switch can support connections to the following devices10/100BASE-TX Fast Ethernet Ports Straight-through and Crossover UTP Cable Fast Ethernet Fiber Slot Module Connector type Fiber cable Maximum lengthPage Specifications Duplex Mode SettingMaking Trunk Connections Switch supports the following trunk configurationsPage Making Sniffer LED Panels LED IndicatorsInterpretation Management Support Performing Network ManagementManagement objects Login Port StatusConsole Management Setting IP AddressConsole interface consists of a series of menu list Telnet Management Web ManagementConsole port does not support modem connection Snmp Management Upgrade FirmwareSupport