KTI Networks KS-801 manual Mounting the Switches

Page 12

2.3 Mounting the Switches

The switches can be placed on a desktop as a stand-alone unit. Allow enough ventilation space between the switch and the objects around it.

Desktop Mounting

For mounting the switch into a 19-inch rack, a pair of mounting brackets is included in the pack.

Install Rack Mount Brackets

Install the switch into a 19-inch rack as illustrated in the following figure:

Install the Switch into a 19-inch Rack

-12-

Image 12

Contents Installation Guide KS-801International Fax 886-2-26983873 Mail Kti@ktinet.com.tw Port Fast Ethernet Managed Switch with Fiber Connectivity Installation GuideTrademarks Table of Contents Introduction Features Page Specifications Installing the Switch Packing ListFiber Slot 100M Fiber slot for Port #9 LED indicators PanelsMounting the Switches Network Switched Ports Making Network Connections10/100BASE-TX Fast Ethernet Switched Ports Switch can support connections to the following devices Manual Configuration10/100BASE-TX Fast Ethernet Ports Straight-through and Crossover UTP Cable Module Connector type Fiber cable Maximum length Fast Ethernet Fiber SlotPage Duplex Mode Setting SpecificationsSwitch supports the following trunk configurations Making Trunk ConnectionsPage Making Sniffer LED Indicators LED PanelsInterpretation Performing Network Management Management SupportLogin Port Status Management objectsSetting IP Address Console ManagementConsole interface consists of a series of menu list Web Management Telnet ManagementConsole port does not support modem connection Upgrade Firmware Snmp ManagementSupport