KTI Networks KS-801 manual

Page 21

The following figure illustrates an example of 2-port trunk connection between switch A and switch B. The aggregated bandwidth of the trunk is 400Mbps.

Rules :

1.One switch can be configured to have up to 2 trunks and each trunk is composed of 2 trunking ports.

2.One trunking port can only belong to one trunk.

3.Only one trunk can exist between two switch units.

4.Crossover UTP cables should be used at the same time for one trunk connection. The length of each cable can be up to 100 meters.

5.When the switched data ports are enabled as trunking ports, they can only serve trunking function, but no other data function.

6.Since the trunking is proprietary, the switches do not support trunk connection to other brand’s switches.

-21-

Image 21
Contents KS-801 Installation GuideInternational Fax 886-2-26983873 Mail Kti@ktinet.com.tw Installation Guide Port Fast Ethernet Managed Switch with Fiber ConnectivityTrademarks Table of Contents Introduction Features Page Specifications Packing List Installing the SwitchPanels Fiber Slot 100M Fiber slot for Port #9 LED indicatorsMounting the Switches Making Network Connections Network Switched Ports10/100BASE-TX Fast Ethernet Switched Ports Switch can support connections to the following devices Manual Configuration10/100BASE-TX Fast Ethernet Ports Straight-through and Crossover UTP Cable Fast Ethernet Fiber Slot Module Connector type Fiber cable Maximum lengthPage Specifications Duplex Mode SettingMaking Trunk Connections Switch supports the following trunk configurationsPage Making Sniffer LED Indicators LED PanelsInterpretation Management Support Performing Network ManagementManagement objects Login Port StatusSetting IP Address Console ManagementConsole interface consists of a series of menu list Web Management Telnet ManagementConsole port does not support modem connection Snmp Management Upgrade FirmwareSupport