KTI Networks KGS-612F user manual Mounting the Switch on a Din-rail Chassis, Applying Power

Page 12

2.4 Mounting the Switch on a Din-rail Chassis

The switch also can be mounted on a din-rail chassis.

The steps are:

1. Screw the din-rail mounting bracket on the bottom of the switch.

2. Mount the units on a din-rail chassis

The din-rail mounting bracket is optional. Consult the place where you purchased the product.

2.5 Applying Power

Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to supply the DC power for the unit should have the AC voltage matching the commercial power voltage in your area.

The AC Power Adapter Specifications

AC input power: AC power voltage of your area, options -

Rated AC120V/60Hz DC7.5V 1.2A

Rated AC230V/50Hz DC7.5V 1.2A

Rated AC240V/50Hz DC7.5V 2A

The steps to apply the power to the product are:

1.Connect power adapter DC plug to the DC input jack located on the back of the unit before connecting to the AC outlet.

2.Connect the power adapter to the AC outlet.

3.Check Power LED indication.

Note: Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to supply the DC power for the unit should have the AC voltage matching the commercial power voltage in your area.

-12-

Image 12

Contents KGS-612F Page Trademarks Table of Contents Snmp Support Appendix. Factory Default Settings Quality of Service 802.1x AuthenticationPlug and Play Fiber ConnectivityFeatures Product PanelsFront panel Rear panel LED Indicators SpecificationsFunction 10/100/1000 Copper PortsSwitch Functions LED IndicatorsDC Power Input Software Management FunctionsMechanical EnvironmentalSafety Cautions Mounting the Switch on a WallUnpacking Mounting the Switch on a Din-rail Chassis Applying PowerAC Power Adapter Specifications Reset Button Making UTP ConnectionsInstalling SFP Fiber Transceiver Connecting Fiber CablesFiber Port Configuration Making Fiber ConnectionConfiguring IP Address and Password for the Switch LED IndicationFunction State Interpretation Abbreviation #of bits Frame fieldUser priority Pvid Port VIDQoS Function Egress Service Policy Packet Priority ClassificationPriority Class Queues 2.1 802.1Q Tag Aware Per port setting Keep Tag Per port settingVlan Function Vlan OperationDrop Untag Per Port Setting Drop Tag Per Port SettingIngress Default Tag Per Port Setting Packet Tag InformationVlan Group Table Configuration Vlan ClassificationPacket Forwarding Egress Settings 802.1X AuthenticationEgress Tagging Rules Summary of Vlan FunctionPage Login to the Switch Unit Start Browser Software and Making ConnectionWeb Browser Set IP Address for the System UnitConfiguration MaintenanceMain Management Menu MonitoringSystem Configuration Description CFISwitch Embedded Web Server operation Management VlanVlan Function Configuration Function PortsSFP DDM Status Information FunctionVlan Configuration Description VLANsPort-based Vlan Mode Port-based Vlan ISP Mode Mode OperationExample Advanced Vlan Mode Ingress Default Tag Ingress Settings Tag-ignore Tag-aware Received packet type Tag Aware =Tag-ignore Vlan Groups Important Notes for Vlan Configuration Switch Vlan Mode selectionAggregation/Trunking configuration Double Tagged in Advanced Vlan ModeAggregation Lacp Rstp 10 802.1X Configuration Radius IP 10.1 802.1X Re-authentication Parameters Mirroring Quality of Service QoS Configuration Description12.1 802.1p Mapping Class 3 ~ ClassDscp Mapping QoS Service Policy Weighted ratio priority Class 3210 = 1111 weighted ratioStorm Control Statistics Overview Statistics DescriptionDetailed Statistics Button DescriptionLacp Status Status DescriptionStatus Description Ping Ping DescriptionReboot System Restore DefaultUpdate Firmware LogoutSnmp Support System Configuration Ports ConfigurationVlan Configuration Port-based Vlan Mode settingLacp Port Configuration Rstp System Configuration Rstp Port Configuration802.1X Configuration Mirroring ConfigurationQuality of Service Configuration QoS Service PolicyQoS 802.1p Mapping QoS Dscp MappingStorm Control Configuration