KTI Networks KGS-612F user manual SFP DDM Status, Information Function

Page 30

4.5.1 SFP DDM Status

DDM (Digital Diagnostic Monitoring) information and status are provided in some SFP transceivers. Part of the information are retrieved and listed as follows:

Information	Function

Port	Port number which has SFP slot (Port 4, Port 5, Port 6 come with SFP.)
Identifier	The identifier information of the transceiver
Connector	The connector type used on the transceiver
SONET Compliance	SONET compliance information of the transceiver
GbE Compliance	Gigabit Ethernet compliance information of the transceiver
Vendor Name	The vendor name of the transceiver
Vendor OUI	The vendor OUI of the transceiver
Temperature	The current temperature sensed inside the transceiver
Voltage	The working voltage sensed inside the transceiver
TX Power	The transmission optical power sensed

[Refresh]	Click to refresh current configuration
[Back]	Click to back to previous page

Note:

1.TX power data is displayed with unit of mW. It can be converted to dBm as remark.

2.N/A: the information is not available

-30-

Image 30

Contents KGS-612F Page Trademarks Table of Contents Snmp Support Appendix. Factory Default Settings Plug and Play Quality of Service802.1x Authentication Fiber ConnectivityFeatures Product PanelsFront panel Rear panel Function LED IndicatorsSpecifications 10/100/1000 Copper PortsSwitch Functions LED IndicatorsMechanical DC Power InputSoftware Management Functions EnvironmentalSafety Cautions Mounting the Switch on a WallUnpacking Mounting the Switch on a Din-rail Chassis Applying PowerAC Power Adapter Specifications Reset Button Making UTP ConnectionsFiber Port Configuration Installing SFP Fiber TransceiverConnecting Fiber Cables Making Fiber ConnectionConfiguring IP Address and Password for the Switch LED IndicationFunction State Interpretation User priority Abbreviation#of bits Frame field Pvid Port VIDQoS Function Egress Service Policy Packet Priority ClassificationPriority Class Queues Vlan Function 2.1 802.1Q Tag Aware Per port settingKeep Tag Per port setting Vlan OperationIngress Default Tag Per Port Setting Drop Untag Per Port SettingDrop Tag Per Port Setting Packet Tag InformationVlan Group Table Configuration Vlan ClassificationPacket Forwarding Egress Tagging Rules Egress Settings802.1X Authentication Summary of Vlan FunctionPage Web Browser Login to the Switch UnitStart Browser Software and Making Connection Set IP Address for the System UnitMain Management Menu ConfigurationMaintenance MonitoringSystem Configuration Description CFISwitch Embedded Web Server operation Management VlanVlan Function Configuration Function PortsSFP DDM Status Information FunctionVlan Configuration Description VLANsPort-based Vlan Mode Port-based Vlan ISP Mode Mode OperationExample Advanced Vlan Mode Ingress Default Tag Ingress Settings Tag-ignore Tag-aware Received packet type Tag Aware =Tag-ignore Vlan Groups Aggregation/Trunking configuration Important Notes for Vlan ConfigurationSwitch Vlan Mode selection Double Tagged in Advanced Vlan ModeAggregation Lacp Rstp 10 802.1X Configuration Radius IP 10.1 802.1X Re-authentication Parameters Mirroring Quality of Service QoS Configuration Description12.1 802.1p Mapping Class 3 ~ ClassDscp Mapping QoS Service Policy Weighted ratio priority Class 3210 = 1111 weighted ratioStorm Control Statistics Overview Statistics DescriptionDetailed Statistics Button DescriptionLacp Status Status DescriptionStatus Description Ping Ping DescriptionUpdate Firmware Reboot SystemRestore Default LogoutSnmp Support Vlan Configuration System ConfigurationPorts Configuration Port-based Vlan Mode settingLacp Port Configuration 802.1X Configuration Rstp System ConfigurationRstp Port Configuration Mirroring ConfigurationQoS 802.1p Mapping Quality of Service ConfigurationQoS Service Policy QoS Dscp MappingStorm Control Configuration