KTI Networks KGS-612F user manual Reboot System, Restore Default, Update Firmware, Logout

Page 58

4.18 Reboot System

This menu is used to reboot the switch unit remotely with current configuration. Starting this menu will make your current http connection lost. You must rebuild the connection to perform any management operation to the unit.

4.19 Restore Default

This menu is used to restore all settings of the switch unit with factory default values. Note that this menu might change the current IP address of the switch and make your current http connection lost.

4.20 Update Firmware

This menu is used to perform in-band firmware (switch software) upgrade. Enter the path and file name of new firmware image file for uploading.

Configuration	Description

Filename	Path and filename (warp format)

[Browse]	Click to browse your computer file system for the firmware image file
[Upload]	Click to start upload

4.21 Logout

This menu is used to perform a logout from the switch management. If current user does not perform any management operation over 3 minutes, the switch will execute an auto logout and abort the current connection.

-58-

Image 58

Contents KGS-612F Page Trademarks Table of Contents Snmp Support Appendix. Factory Default Settings Plug and Play Quality of Service802.1x Authentication Fiber ConnectivityProduct Panels FeaturesFront panel Rear panel Function LED IndicatorsSpecifications 10/100/1000 Copper PortsSwitch Functions LED IndicatorsMechanical DC Power InputSoftware Management Functions EnvironmentalMounting the Switch on a Wall Safety CautionsUnpacking Applying Power Mounting the Switch on a Din-rail ChassisAC Power Adapter Specifications Reset Button Making UTP ConnectionsFiber Port Configuration Installing SFP Fiber TransceiverConnecting Fiber Cables Making Fiber ConnectionLED Indication Configuring IP Address and Password for the SwitchFunction State Interpretation User priority Abbreviation#of bits Frame field Pvid Port VIDQoS Function Packet Priority Classification Egress Service PolicyPriority Class Queues Vlan Function 2.1 802.1Q Tag Aware Per port settingKeep Tag Per port setting Vlan OperationIngress Default Tag Per Port Setting Drop Untag Per Port SettingDrop Tag Per Port Setting Packet Tag InformationVlan Classification Vlan Group Table ConfigurationPacket Forwarding Egress Tagging Rules Egress Settings802.1X Authentication Summary of Vlan FunctionPage Web Browser Login to the Switch UnitStart Browser Software and Making Connection Set IP Address for the System UnitMain Management Menu ConfigurationMaintenance MonitoringSystem Configuration Description CFIManagement Vlan Switch Embedded Web Server operationVlan Function Configuration Function PortsSFP DDM Status Information FunctionVlan Configuration Description VLANsPort-based Vlan Mode Mode Operation Port-based Vlan ISP ModeExample Advanced Vlan Mode Ingress Default Tag Ingress Settings Tag-ignore Tag-aware Received packet type Tag Aware =Tag-ignore Vlan Groups Aggregation/Trunking configuration Important Notes for Vlan ConfigurationSwitch Vlan Mode selection Double Tagged in Advanced Vlan ModeAggregation Lacp Rstp 10 802.1X Configuration Radius IP 10.1 802.1X Re-authentication Parameters Mirroring Quality of Service QoS Configuration Description12.1 802.1p Mapping Class 3 ~ ClassDscp Mapping QoS Service Policy Weighted ratio priority Class 3210 = 1111 weighted ratioStorm Control Statistics Overview Statistics DescriptionDetailed Statistics Button DescriptionLacp Status Status DescriptionStatus Description Ping Ping DescriptionUpdate Firmware Reboot SystemRestore Default LogoutSnmp Support Vlan Configuration System ConfigurationPorts Configuration Port-based Vlan Mode settingLacp Port Configuration 802.1X Configuration Rstp System ConfigurationRstp Port Configuration Mirroring ConfigurationQoS 802.1p Mapping Quality of Service ConfigurationQoS Service Policy QoS Dscp MappingStorm Control Configuration