KTI Networks KGS-612F user manual Port-based Vlan ISP Mode, Example, Mode Operation

Page 33

4.6.2 Port-based VLAN ISP Mode

Configuration	Description

Joint port	Select a port as the joint port for all 5 port-based VLAN groups

[Apply]	Click to apply the configuration change
[Refresh]	Click to refresh current configuration
[Back]	Click to go back to upper menu

Example:

If Port 6 is selected as the joint port, the 5 port-based VLAN groups are configured as follows auto- matically:

Group 1 - member [Port 1, Port 6] Group 2 - member [Port 2, Port 6] Group 3 - member [Port 3, Port 6] Group 4 - member [Port 4, Port 6] Group 5 - member [Port 5, Port 6]

Mode Operation :

1.The joint port is the shared member port for all groups.

2.Two member ports are configured in each group.

3.The member ports in same group can communicate with other only.

4.No packet tag is examined.

5.A received packet will not be modified (i.e. tagging or untagging) through VLAN operation till it is transmitted.

-33-

Image 33

Contents KGS-612F Page Trademarks Table of Contents Snmp Support Appendix. Factory Default Settings 802.1x Authentication Quality of ServicePlug and Play Fiber ConnectivityFeatures Product PanelsFront panel Rear panel Specifications LED IndicatorsFunction 10/100/1000 Copper PortsLED Indicators Switch FunctionsSoftware Management Functions DC Power InputMechanical EnvironmentalSafety Cautions Mounting the Switch on a WallUnpacking Mounting the Switch on a Din-rail Chassis Applying PowerAC Power Adapter Specifications Making UTP Connections Reset ButtonConnecting Fiber Cables Installing SFP Fiber TransceiverFiber Port Configuration Making Fiber ConnectionConfiguring IP Address and Password for the Switch LED IndicationFunction State Interpretation #of bits Frame field AbbreviationUser priority Pvid Port VIDQoS Function Egress Service Policy Packet Priority ClassificationPriority Class Queues Keep Tag Per port setting 2.1 802.1Q Tag Aware Per port settingVlan Function Vlan OperationDrop Tag Per Port Setting Drop Untag Per Port SettingIngress Default Tag Per Port Setting Packet Tag InformationVlan Group Table Configuration Vlan ClassificationPacket Forwarding 802.1X Authentication Egress SettingsEgress Tagging Rules Summary of Vlan FunctionPage Start Browser Software and Making Connection Login to the Switch UnitWeb Browser Set IP Address for the System UnitMaintenance ConfigurationMain Management Menu MonitoringSystem CFI Configuration DescriptionSwitch Embedded Web Server operation Management VlanVlan Function Ports Configuration FunctionInformation Function SFP DDM StatusVLANs Vlan Configuration DescriptionPort-based Vlan Mode Port-based Vlan ISP Mode Mode OperationExample Advanced Vlan Mode Ingress Default Tag Ingress Settings Tag-ignore Tag-aware Received packet type Tag Aware =Tag-ignore Vlan Groups Switch Vlan Mode selection Important Notes for Vlan ConfigurationAggregation/Trunking configuration Double Tagged in Advanced Vlan ModeAggregation Lacp Rstp 10 802.1X Configuration Radius IP 10.1 802.1X Re-authentication Parameters Mirroring QoS Configuration Description Quality of ServiceClass 3 ~ Class 12.1 802.1p MappingDscp Mapping Weighted ratio priority Class 3210 = 1111 weighted ratio QoS Service PolicyStorm Control Statistics Description Statistics OverviewButton Description Detailed StatisticsStatus Description Lacp StatusStatus Description Ping Description PingRestore Default Reboot SystemUpdate Firmware LogoutSnmp Support Ports Configuration System ConfigurationVlan Configuration Port-based Vlan Mode settingLacp Port Configuration Rstp Port Configuration Rstp System Configuration802.1X Configuration Mirroring ConfigurationQoS Service Policy Quality of Service ConfigurationQoS 802.1p Mapping QoS Dscp MappingStorm Control Configuration