KTI Networks KGS-612F user manual Ports, Configuration Function

Page 29

4.5 Ports

Configuration	Function

Enable Jumbo Frames	Select to enable jumbo frame support
Port	The port number
Link	Speed and duplex status with green background - port is link on
	Down with red background - port is link down
Mode	Select port operating mode
	Disabled - disable the port operation
	Mode	Auto-negotiation		Speed capability	Duplex capability
	Auto		Enable	10, 100, 1000M	Full, Half
	10 Half		Disable	10M	Half
	10 Full		Disable	10M	Full
	100 Half		Disable	100M	Half
	100 Full		Disable	100M	Full
	1000 Full		Enable	1000M	Full
	Force 1000 Full		Disable	1000M	Full
Flow Control	Set port flow control function
	v - set to enable 802.3x pause flow control for ingress and egress

[SFP DDM]	Click to display DDM information and status of the SFP transceivers
[Apply]	Click to apply the configuration change

Notes:

1.For 100M fiber application on Port 4 and Port 5, it is necessary to configure 100 Full for the port with fiber connection.

2.For 1000M fiber application on Port 6, just leave the default port configuration Auto for fiber connection.

-29-

Image 29

Contents KGS-612F Page Trademarks Table of Contents Snmp Support Appendix. Factory Default Settings 802.1x Authentication Quality of ServicePlug and Play Fiber ConnectivityFront panel Rear panel FeaturesProduct Panels Specifications LED IndicatorsFunction 10/100/1000 Copper PortsLED Indicators Switch FunctionsSoftware Management Functions DC Power InputMechanical EnvironmentalUnpacking Safety CautionsMounting the Switch on a Wall AC Power Adapter Specifications Mounting the Switch on a Din-rail ChassisApplying Power Making UTP Connections Reset ButtonConnecting Fiber Cables Installing SFP Fiber TransceiverFiber Port Configuration Making Fiber ConnectionFunction State Interpretation Configuring IP Address and Password for the SwitchLED Indication #of bits Frame field AbbreviationUser priority Pvid Port VIDQoS Function Priority Class Queues Egress Service PolicyPacket Priority Classification Keep Tag Per port setting 2.1 802.1Q Tag Aware Per port settingVlan Function Vlan OperationDrop Tag Per Port Setting Drop Untag Per Port SettingIngress Default Tag Per Port Setting Packet Tag InformationPacket Forwarding Vlan Group Table ConfigurationVlan Classification 802.1X Authentication Egress SettingsEgress Tagging Rules Summary of Vlan FunctionPage Start Browser Software and Making Connection Login to the Switch UnitWeb Browser Set IP Address for the System UnitMaintenance ConfigurationMain Management Menu MonitoringSystem CFI Configuration DescriptionVlan Function Switch Embedded Web Server operationManagement Vlan Ports Configuration FunctionInformation Function SFP DDM StatusVLANs Vlan Configuration DescriptionPort-based Vlan Mode Example Port-based Vlan ISP ModeMode Operation Advanced Vlan Mode Ingress Default Tag Ingress Settings Tag-ignore Tag-aware Received packet type Tag Aware =Tag-ignore Vlan Groups Switch Vlan Mode selection Important Notes for Vlan ConfigurationAggregation/Trunking configuration Double Tagged in Advanced Vlan ModeAggregation Lacp Rstp 10 802.1X Configuration Radius IP 10.1 802.1X Re-authentication Parameters Mirroring QoS Configuration Description Quality of ServiceClass 3 ~ Class 12.1 802.1p MappingDscp Mapping Weighted ratio priority Class 3210 = 1111 weighted ratio QoS Service PolicyStorm Control Statistics Description Statistics OverviewButton Description Detailed StatisticsStatus Description Lacp StatusStatus Description Ping Description PingRestore Default Reboot SystemUpdate Firmware LogoutSnmp Support Ports Configuration System ConfigurationVlan Configuration Port-based Vlan Mode settingLacp Port Configuration Rstp Port Configuration Rstp System Configuration802.1X Configuration Mirroring ConfigurationQoS Service Policy Quality of Service ConfigurationQoS 802.1p Mapping QoS Dscp MappingStorm Control Configuration